Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/16/2001 11:53:30 AM EST
I'm looking for the U shaped block that limits a 20 rd magazine to hold only 5 rds. Does anybody have any laying around? Thanks, Sig229
Link Posted: 10/16/2001 2:53:53 PM EST
me too.. I read you can use wood cut to the right size but that sounds like too much work,, let me know if you find any. thanks
Link Posted: 10/16/2001 4:12:45 PM EST
1) Remove magazine floor plate and spring. 2) Place a piece of wood or plastic in magazine. 3) Load 5rd into magazine and then mark wood or plastic just under flush with bottom of magazine. Make sure the blocking material doesn't interfere with the spring. All you need is a small dowl that sits inside the spring. BISHOP
Link Posted: 10/16/2001 4:22:42 PM EST
I found one but may have at least 2. Slight surface rust. First thing I had the gun dealer do was drill that silly one way rivet out.
Top Top