Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 8/16/2002 3:22:15 PM EST
Link Posted: 8/16/2002 3:55:06 PM EST
[url]www.floridagunworks.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=FG&Category_Code=HKA+SM[/url] and this will help with other things. [url]www.hkweaponsystems.com/[/url] SSD
Link Posted: 8/16/2002 4:01:49 PM EST
Link Posted: 8/16/2002 4:09:39 PM EST
It's not an "official" claw mount but it does work. Under $50 from CDNN. [img]http://www.supercharger.net/private/cetme1.jpg[/img]
Link Posted: 8/16/2002 4:12:06 PM EST
Link Posted: 8/16/2002 4:23:54 PM EST
Link Posted: 8/16/2002 4:35:26 PM EST
Maybe I can fix you up mike, bring it to the shop sometime. Is there enough meat on the flats for me to drill and tap it? Balming
Link Posted: 8/16/2002 5:16:47 PM EST
I had to take a Dremel to the claws on ther mount, but it only took me about 3 trial and error attempts to get a good, level fit. That's an early Century SS receiver gun, which has the same pads molded in the receiver as the original stamped receiver CETME's (original Spanish rifles and the HK G3). It's the slight oversize from the cast stainless that causes the fitment problem. No idea how they fit on the stamped Century guns, but I can't believe it would be that tough to modify. The mount is aluminium.
Link Posted: 8/17/2002 6:47:24 AM EST
Top Top