Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/20/2006 4:48:52 PM EST
I know how you're SUPPOSED to remove them (push/hold button; slide forward floorplate)
But I just can't seem to remove them on my new glock 26 mags.
Am I missing something? What's wrong?
Link Posted: 1/20/2006 4:50:19 PM EST
put it in a vise, depress the button, and whack it with a mallet. those things are freaking tight
Link Posted: 1/20/2006 4:50:40 PM EST
[Last Edit: 1/20/2006 4:51:44 PM EST by sixgunsblazing]
take your glock tool (or small push pin/phillips screwdriver) and just shove that pin strainght down into the magazine. Then it should just slide off
ETA The last 27 I put a +2 on was a bitch to take off the floorplate.

Link Posted: 1/20/2006 4:51:33 PM EST
Link Posted: 1/20/2006 4:57:57 PM EST
1 block C4. Shape into a U, wrap magazine in det cord, then put C4 charge around magazine. Insert blasting cap. Detonate. I ga' ran 'tee that floor plate will be seperated....

Semper Fi
Link Posted: 1/20/2006 4:58:03 PM EST

While pushing the button on the bottom of the mag with a punch. Apply pressure to one corner of the floor plate against a table or other hard object. Once you get it started, it will come right off.

Link Posted: 1/20/2006 4:58:32 PM EST

If they are first gen mags with no hole in the baseplate just push the back corner of the baseplate on a flat surface. Push it. ]

I they have the hole push a punch into the hole until the lock plate inside the mag is flipped and push the plate off.

You may need to cruise to Glocktalk
Link Posted: 1/20/2006 5:16:59 PM EST
ok thank god. I wasn't the only one. I got them now: the key is to use a screwdriver and much excessive force.

THANKS SO MUCH EVERYONE!
Top Top