Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 5/9/2001 10:36:47 PM EST
What is your opinion on the best bullet weight for this caliber. Try and back it up with factual data.Talking about ball ammo. Thanks
Link Posted: 5/9/2001 10:42:16 PM EST
Well is it just plinking ammo? I reload 155 grn because I dont want to kill myself when I shooting alot of rounds. I use 180' in my carry gun just because I want to sling as much lead as I can.
Link Posted: 5/9/2001 10:42:38 PM EST
For what? For ipsc, I use the 180gr.JHP and the 200gr. lead. At home the federal hydra shock 155gr.JHP
Link Posted: 5/9/2001 10:53:54 PM EST
I was thinking of ball ammo for a battle type atmosphere.
Link Posted: 5/9/2001 10:56:38 PM EST
I really have a hard time defending any certain grain of ammo. If you hit someone like you should its going to cause a bit of damage. Specially in hardball I doubt the difference between 150-180 grns are going to be noticeble
Link Posted: 5/10/2001 12:17:52 AM EST
165gr. in 40S&W, and 180gr. for 10mm are ideal weights, I believe. I have used 180gr. in 40S&W but feel it's at the upper limit due to it's bullet length and the chance of dangerous pressure levels if the bullet gets pushed back into the case too far.
Link Posted: 5/10/2001 2:59:07 AM EST
I like the 180's myself. I was able to put huge holes in 2 phone books stacked together with them. In fact I found that the jacket seperated halfway through. However, in a shooting situation I would rather have the jhp's to avoid over penetration.
Link Posted: 5/10/2001 3:07:12 AM EST
As Atomic Punk pointed out, the 180 grain bullets don't leave much room for powder in the case. With a 165 grain FMJ bullet, you'll still have plenty of sectional density plus a little more velocity to punch through barriers.
Link Posted: 5/10/2001 3:27:02 AM EST
A couple of years back there was an article in the American Rifleman on various loads for the .40 S&W. According to the tests they ran, the 165 grain bullet performed the best. I'll try to dig up the article and send you more info.
Link Posted: 5/10/2001 3:43:18 AM EST
I shoot a lot of .40 and prefer the 155 gr. The Border Patrol is involved in a lot of gunfights, and they are happy with the load.
Link Posted: 5/10/2001 7:07:29 AM EST
If wanting ball ammo choose the 165gr. UMC as it's the strongest of all commercially produced FMJ ammo. Federal, CCI and PMC 165gr. FMJ are all reduced velocity target loads. Speer Lawman has a 155gr. & 165gr. FMJ load but I'm not sure about the ballistics. The 180gr. loads are your second best choice as nearly all those are full velocity loads.
Link Posted: 5/10/2001 2:01:40 PM EST
165gr. JHP Cor-Bon very good grain size at 1150fps so it's a good velocity and stopping power.
Top Top