Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 3/17/2005 7:19:49 AM EST
Anybody know how hard it is to re-jet the carb on one of these??

Time, tools needed?

any info would be appreciated
Link Posted: 3/17/2005 7:22:21 AM EST
Why the need to rejet? added a pipe? filter?
Link Posted: 3/17/2005 7:26:45 AM EST
[Last Edit: 3/17/2005 7:27:46 AM EST by ironoxbows]
altitude change

We're going to colorado in May
Link Posted: 3/17/2005 8:08:32 AM EST
anyone?
Link Posted: 3/17/2005 8:35:44 AM EST
You might just want to adjust the c clip on the rod that is in the top of the carb, Rejetting requires carb removal and for the bowl to be taken off so the jets can be accessed. If you have never done it, take it to someone who has. However, if you have the time, dive in and figure it out. Just takes time.
Link Posted: 3/17/2005 8:46:47 AM EST
Your best bet. Get the factory manual from Yahama. It will have the correct jet setting for the increase in elevation. Normaly its one jet size smaller than stock. And raise the clip on the needle one notch.
LOL or just call the local dealer and talk to one of the mechanics...
Top Top