Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 2/21/2006 12:03:13 PM EST
[Last Edit: 2/25/2006 6:31:52 PM EST by migradog]
I bought a 26" Shotgun barrel off the EE
When I look down the top, the rib goes to the right and then back to the left.
I marked the worst place with the yellow arrow, What say you?

Link Posted: 2/21/2006 12:05:07 PM EST
A "Quail Flying From Right to Left Special".

Pretty rare.
Link Posted: 2/21/2006 12:05:46 PM EST
No. I have never seen a vent rib that was like that.
Link Posted: 2/21/2006 12:06:15 PM EST
Looks like a left-handed barrel. Is it metric?
Link Posted: 2/21/2006 12:06:15 PM EST
I'd say someone's head hurts after having a shotgun barrel totally ruined over it.
Link Posted: 2/21/2006 12:07:34 PM EST
UPS'd
Link Posted: 2/21/2006 12:08:20 PM EST
reminds me of looney toons when bugs bunny would bend elmer fudd's barrel into a U so he shot himself in the face
Link Posted: 2/21/2006 12:09:05 PM EST
Not Good is what I say.
Link Posted: 2/21/2006 12:09:48 PM EST

Originally Posted By taptap:
UPS'd


+1
Link Posted: 2/21/2006 12:11:59 PM EST
Don't think it is normal. Again, UPS'd
Link Posted: 2/21/2006 12:12:21 PM EST
[Last Edit: 2/21/2006 12:13:19 PM EST by migradog]
USPS'd, but wouldn't it take a really hard knock?
But the again it wrapped in paper with 1 layer of bubble wrap.
and there are no impact marks on the barrel.
Link Posted: 2/21/2006 12:16:32 PM EST
Actually looks like the entire barrel is bent.

If there are no marks, it was either refinished or was wrapped up when it got hit.

90% chance it's shipping damage.
Link Posted: 2/21/2006 12:20:22 PM EST
did the phrase "once used as a cheater bar" appear in any form in the ad?
Link Posted: 2/21/2006 12:21:10 PM EST

Originally Posted By Old_Painless:
A "Quail Flying From Right to Left Special".

Pretty rare.



You cracked me up with that one...............
Link Posted: 2/21/2006 12:33:45 PM EST

Originally Posted By migradog:
USPS'd, but wouldn't it take a really hard knock?
But the again it wrapped in paper with 1 layer of bubble wrap.
and there are no impact marks on the barrel.



Are there still boot tread marks from where the UPS guy stood on the box?
Link Posted: 2/21/2006 12:35:27 PM EST
Shoots around corners.
Link Posted: 2/21/2006 4:37:27 PM EST
No marks at all.
Link Posted: 2/21/2006 4:40:13 PM EST

Originally Posted By photokirk:
Looks like a left-handed barrel. Is it metric?



Looks like Imperial to me.
Link Posted: 2/21/2006 4:45:04 PM EST
[Last Edit: 2/21/2006 4:46:19 PM EST by clement]

Originally Posted By FLAL1A:

Originally Posted By photokirk:
Looks like a left-handed barrel. Is it metric?



Looks like Imperial to me.



5/8ths or 7/16ths?
Link Posted: 2/21/2006 4:48:36 PM EST

Originally Posted By clement:

Originally Posted By FLAL1A:

Originally Posted By photokirk:
Looks like a left-handed barrel. Is it metric?



Looks like Imperial to me.



5/8ths or 7/16ths?



I was gonna say 11/32ds, but I'm not an expert.
Link Posted: 2/21/2006 4:48:47 PM EST
OH MY GOD!
It's the Dick Cheney Special!!!!!
Link Posted: 2/21/2006 4:51:07 PM EST
It's a Whittington barrel.
Link Posted: 2/21/2006 4:53:24 PM EST
someone was adjusting the sights
Link Posted: 2/21/2006 4:59:37 PM EST
no its bent.. it can be easly fixed with the right tools... If you dont have the tools.. dude dont try!
Link Posted: 2/22/2006 7:10:46 PM EST
[Last Edit: 2/22/2006 7:11:29 PM EST by migradog]
Here's what the seller said!!!


Hey Mike,
I don't know anything about the history of the barrel... like I said in
my posting I bought a used mossberg awhile back with 2 barrels, the 26" and
an 18" barrel. I only fired the gun with the 18" on it like 1 box and I
sold the shotgun shortly after. This was my first shotgun purchase and I
only wanted to try it out and I didn't like it as much as handgun shooting.
I thought the barrel looked a little out of whack also but I thought maybe
it was made to be like this so that when installed on the gun it lined up
with the chamber or something.
Since I got it like this and I didn't have
anything to compare it with I thought this was a possibility. Have you
tried installing it on the mossberg? I can't remember if it looks straight
and lined up with the receiver when installed. From what I remember, it
looks straight on one side of the barrel and maybe flares out on the other
side going towards the receiver. Kind of like
| |
| |
| |
| |
| \
| |

I did not buy the shotgun from the original owner and he didn't tell me much
about its history other than he only shot about a box also through it.
Sorry I couldn't be more help on this I would suggest trying to shoot a few
rounds to see if it shoots out of whack. I never stored it in a position to
make it curve nor dropped it or flexed it so if its not shooting straight it
must have been a past owner. Please let me know what you find out.


Link Posted: 2/22/2006 7:31:24 PM EST
Tell the seller you want your money back! From the way he is dancing around the subject he knew it was bent in the first place. Probably hoping that it would get more damaged in transit. That way he still got his money and you get reimbursed with the insurance money.
Link Posted: 2/22/2006 7:32:48 PM EST
I would think that VP Cheney would have missed had he had that barrel.
Link Posted: 2/22/2006 7:39:22 PM EST
I think you got Wenzelled.
Link Posted: 2/25/2006 8:43:05 AM EST
Haven't heard form the guy since 2/22.
When should I get pissed?
Link Posted: 2/25/2006 8:46:30 AM EST

Originally Posted By migradog:
Haven't heard form the guy since 2/22.
When should I get pissed?


Several days ago.
Link Posted: 2/25/2006 8:59:35 AM EST
a little off topic but i saw a guy who built a "silencer" for shotguns! He basically welded on an extra 3 FEET of Barrel to his gun! It looked totally silly like he was carrying a plumbing pipe but it works. By the time the "explosion" of gas reaches the end there is little noise left so it makes a sound of a soda can opening. Also it increases accuracy and adds a LOT of velocity to the Shots. Yet this is considered totally legal because it is not a "silencer" I bet if that ever became popular the ATF would create a "too long" rule or something.
Link Posted: 2/25/2006 10:34:29 PM EST
I think that's made to compensate for severe wind drift.
Link Posted: 2/25/2006 10:40:01 PM EST

Originally Posted By scrum:

Originally Posted By migradog:
USPS'd, but wouldn't it take a really hard knock?
But the again it wrapped in paper with 1 layer of bubble wrap.
and there are no impact marks on the barrel.



Are there still boot tread marks from where the UPS guy stood on the box?


I worked at UPS for a long time, we called that the UPS seal of aproval

Also that could have very easily happened in the UPS conveyor system, I have seen golf clubs come through that were bent 90°
Link Posted: 2/25/2006 10:42:40 PM EST

Originally Posted By t-stox:
a little off topic but i saw a guy who built a "silencer" for shotguns! He basically welded on an extra 3 FEET of Barrel to his gun! It looked totally silly like he was carrying a plumbing pipe but it works. By the time the "explosion" of gas reaches the end there is little noise left so it makes a sound of a soda can opening. Also it increases accuracy and adds a LOT of velocity to the Shots. Yet this is considered totally legal because it is not a "silencer" I bet if that ever became popular the ATF would create a "too long" rule or something.



Cbellas has those, a 3 foot extension for the barrel
Link Posted: 2/25/2006 11:22:36 PM EST
Top Top