Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 12/16/2005 5:23:23 PM EDT
[Last Edit: 12/16/2005 5:23:50 PM EDT by mjohn3006]
Ar's I have(well I did before the accident):
20 HBAR target crowned, free floated for target goodness
20" military profile
16" M4gery
11.5" with prm 5.5" FH XM177clone


Besides the obvious reason of, you only have 4. Why do I need a Dissipator?

Link Posted: 12/16/2005 5:24:10 PM EDT
short as a 16" with the long sight radius of the 20. its the best of both worlds.
Link Posted: 12/16/2005 5:24:30 PM EDT
The same reason you need to accidently post this in the GD instead of the AR forum you stupid jackass!
Link Posted: 12/16/2005 5:24:58 PM EDT
I have one, I think it looks nice but I dont like all the added weight of the heavy barrel when its only a 16" barrel so Id much rather have an M4 upper
Link Posted: 12/16/2005 5:29:21 PM EDT
cause they are so f'ing cool!

I just built a M1S Dissy on a MEGA lower. and I LIKE IT!

I'm building a .22 dedicated Dissy for my daughter.

and my next two uppers will be Dissy as well.


They provide a nice contrast to my space gun.

No Expert
Link Posted: 12/16/2005 5:29:56 PM EDT
Dissipators rock. I plan on buliding one in the next month or so.
Link Posted: 12/16/2005 5:34:23 PM EDT

Originally Posted By No_Expert:

cause they are so f'ing cool!




Bling.
Link Posted: 12/16/2005 5:35:45 PM EDT

Originally Posted By No_Expert:
cause they are so f'ing cool!



What HE said.
Link Posted: 12/16/2005 5:39:39 PM EDT
how is your ff 20" accuracy compared to the other configs?

I just bought a 20"
Link Posted: 12/16/2005 5:39:56 PM EDT
Cause after the paperwork goes through, I will have a 22lr silencer.....and I'm thinking that a A2 Dissy with a supressor would look just about like a typical 20" rifle with a bit of a buldge at the end. With my 22lr conversion in it it would be a pretty sweet looking little quiet as all heck rifle
Link Posted: 12/16/2005 5:45:29 PM EDT
You need one because you don't have one.
Link Posted: 12/16/2005 5:48:16 PM EDT
Link Posted: 12/16/2005 5:55:04 PM EDT

Originally Posted By tc6969:
Lets get this straight.

It has NOTHING to do with need!

You simply WANT a dissipator.

You should have one.

See how simple that was?



What he said!
Link Posted: 12/16/2005 6:26:29 PM EDT

Originally Posted By mjohn3006:
The same reason you need to accidently post this in the GD instead of the AR forum you stupid jackass!



Ya dumb ass!
Link Posted: 12/16/2005 6:34:46 PM EDT
Link Posted: 12/16/2005 6:36:11 PM EDT

Originally Posted By mjohn3006:
Ar's I have(well I did before the ):
20 HBAR target crowned, free floated for target goodness
20" military profile
16" M4gery
11.5" with prm 5.5" FH XM177clone


Besides the obvious reason of, you only have 4. Why do I need a Dissipator?


Possible zombie attack while at work, seems to be the latest reason lately.
Link Posted: 12/16/2005 6:40:21 PM EDT
because they look really cool with a 12" rail and an aimpoint.
Link Posted: 12/16/2005 7:04:03 PM EDT

Originally Posted By Paul:
I'd like them a whole lot better if they were about two pounds lighter!




cant you have the barrel re profiled to lose some weight or get bigger muscles to carry it lol.
Link Posted: 12/16/2005 7:20:40 PM EDT
what is the gas port length on that thing?
Link Posted: 12/16/2005 7:23:23 PM EDT
I bought one for my son. It's nice but it would way out of balance on a lower with a 6 position stock. You need the A2 stock to go with it. One thing I URGE you to do if you have to have one, have Bushmaster make you one with the fluted barrels. That will take an HBAR and reduce the weight to a more managable weight. If you really want to have a 20" sight picture for your 16" gun, get a .062" National Match front sight poast. Or even a .052" front sight to make it a finer post. You'll like it much better, good front sight with out all the extra weight.
Link Posted: 12/16/2005 7:28:46 PM EDT
I want one!
Link Posted: 12/16/2005 7:34:29 PM EDT
[Last Edit: 12/16/2005 7:34:43 PM EDT by KA3B]

Originally Posted By NimmerMehr:
what is the gas port length on that thing?



That's why it's called a Dissapator.
Link Posted: 12/16/2005 7:38:01 PM EDT

Originally Posted By KA3B:

Originally Posted By NimmerMehr:
what is the gas port length on that thing?



That's why it's called a Dissapator.



*sigh* drilled at carbine, mid-length or over drilled rifle length?
Link Posted: 12/16/2005 7:38:49 PM EDT

Originally Posted By NimmerMehr:
what is the gas port length on that thing?



Here are the barrels.

Link Posted: 12/16/2005 7:58:27 PM EDT

Originally Posted By TheRedHorseman:
short as a 16" with the long sight radius of the 20. its the best of both worlds.



Yup...TheRedHorseman is right again! That's the #1 reason. 2nd is the fact that they look mean as $h!t! I got that same upper from Model 1. I KNOW that there are a few that have had a problem with Model 1, and I remember one guy in particular from a few months ago that had numerous probs with them, but I finally got to the range with mine. It fired dead on. You have to have at least one. And when you slap a rail system on there.....SWEET! Anyway...wait a minute...did I say that TheRedHorseman was right...I'm drinking too much...
Link Posted: 12/16/2005 8:04:26 PM EDT
Besides, how can you not love a face like this?!?


NOT MINE...TAKEN FROM A PIC OF SEYDOU'S!

Hopefully he won't mind!
Link Posted: 12/16/2005 8:25:34 PM EDT
Is here a link for dissy uppers??? Bushmaster,and model 1 sales any other quality places besides bushmaster?? I am thinking of building one for myself I have the lower built and am looking for a upper either RRA midlength A4 or Dissy.
Link Posted: 12/16/2005 8:27:53 PM EDT

Originally Posted By GA-Dawg:
Besides, how can you not love a face like this?!?

img.villagephotos.com/p/2005-7/1053219/carbinephoto1.jpg
NOT MINE...TAKEN FROM A PIC OF SEYDOU'S!

Hopefully he won't mind!



very nice.
Link Posted: 12/16/2005 8:31:33 PM EDT
I just built this pig...

Link Posted: 12/16/2005 8:38:44 PM EDT

Originally Posted By qualityhardware:
I just built this pig...

img233.imageshack.us/img233/1808/dis0031te.jpg




I like it. I'll take mine in tan. Lower built. Looking for upper.
Link Posted: 12/16/2005 8:41:14 PM EDT
Heavy barrel, no thanks.
Link Posted: 12/16/2005 8:43:39 PM EDT

Originally Posted By qualityhardware:
I just built this pig...

img233.imageshack.us/img233/1808/dis0031te.jpg



Oh yeah...that's what I'm talking about.


And nice avatar...George C. Scott was a great actor. One of his best roles was about this time of year! HUMBUG!
Link Posted: 12/16/2005 10:03:16 PM EDT

Originally Posted By mjohn3006:
The same reason you need to accidently post this in the GD instead of the AR forum you stupid jackass!



Top Top