Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Arrow Left Previous Page
Page / 2
Posted: 6/17/2009 11:51:32 PM EST
They don't fit. It says .357 on the fucking barrel.
Link Posted: 6/17/2009 11:54:42 PM EST
[Last Edit: 6/17/2009 11:55:31 PM EST by theBUBBAMANcan]
How about because the .357 Sig is based on a necked-down .40 case. That's why it won't fit.

ETA: To my understanding the .357 Sig is a .40 S&W necked down to accept a 9mm bullet.
Link Posted: 6/17/2009 11:58:31 PM EST
Ummm....

I don't even know where to begin......



Somewhere in my past, I recall a guy being angry because someone sold him 9mm Parabellum for his 9mm Luger.......

One could say that this is the OPPOSITE case.....

To make a long story short.....in this instance the .357 caliber has NOTHING to do with the cartridge case.
Link Posted: 6/18/2009 12:01:43 AM EST
You cannot be serious.

Link Posted: 6/18/2009 12:04:09 AM EST
On second thought...this must indicate a serious defect with your pistol.

Please send it to me for safe disposal.
Link Posted: 6/18/2009 12:04:45 AM EST
For some reason the "Not sure if serious" picture comes to mind.
Link Posted: 6/18/2009 12:05:17 AM EST
rofl
Link Posted: 6/18/2009 12:08:25 AM EST
Originally Posted By Keith_J:
You cannot be serious.



I cannot possibly believe this is for real.
Link Posted: 6/18/2009 12:09:53 AM EST
your joking right? i hope you are
Link Posted: 6/18/2009 12:30:07 AM EST
Originally Posted By Sestemybe:
your joking right? i hope you are


obvious bored guy is obviously bored, or something like that. Yes, I am joking. I don't even own a 686. My friend has a nice 7 shot 686 though.
Link Posted: 6/18/2009 12:32:56 AM EST
You already answered the question: they won't fit.
Link Posted: 6/18/2009 12:36:02 AM EST
Have you tried forcing them in with a hammer?
Link Posted: 6/18/2009 12:36:35 AM EST
Originally Posted By gunnut284:
You already answered the question: they won't fit.


Yes
Link Posted: 6/18/2009 12:37:03 AM EST
Originally Posted By chips:
Have you tried forcing them in with a hammer?


Ball peen or air hammer?
Link Posted: 6/18/2009 12:40:45 AM EST
Originally Posted By LinggrrLonggrr:
They don't fit. It says .357 on the fucking barrel.


Obvious troll is obvious.

New idea - why not try some .38 Supers in a .38 Special revolver?
Link Posted: 6/18/2009 12:53:30 AM EST
Originally Posted By Lancair:
Originally Posted By LinggrrLonggrr:
They don't fit. It says .357 on the fucking barrel.


Obvious troll is obvious.

New idea - why not try some .38 Supers in a .38 Special revolver?


Holy shit, I didn't know they spoke English in Austria.
Link Posted: 6/18/2009 1:15:49 AM EST
what a dumb-ass troll question.....

why dont you try stuffing a .50AE cartridge in that .357??? it will fit, just beat it in with a sledgehammer
Link Posted: 6/18/2009 1:26:35 AM EST
Originally Posted By bruce21b:
what a dumb-ass troll question.....

why dont you try stuffing a .50AE cartridge in that .357??? it will fit, just beat it in with a sledgehammer


Eat a dick. I guess you didn't see where I said I was joking.
Link Posted: 6/18/2009 1:34:46 AM EST
Link Posted: 6/18/2009 1:53:01 AM EST
Originally Posted By chips:
Have you tried forcing them in with a hammer?



I would expect that if you used a punch and a hammer you could get results

Link Posted: 6/18/2009 1:53:47 AM EST
Try it.
Link Posted: 6/18/2009 1:54:57 AM EST
Someone must be bored.
Link Posted: 6/18/2009 2:00:29 AM EST
Which gun store do you work at?
Link Posted: 6/18/2009 2:03:37 AM EST
Originally Posted By LinggrrLonggrr:
Originally Posted By Lancair:
Originally Posted By LinggrrLonggrr:
They don't fit. It says .357 on the fucking barrel.


Obvious troll is obvious.

New idea - why not try some .38 Supers in a .38 Special revolver?


Holy shit, I didn't know they spoke English in Austria.


Deutsch habe mir betrübt machen.
Link Posted: 6/18/2009 2:04:50 AM EST
This explains why my .30-30 won't chamber .300 Savage
Link Posted: 6/18/2009 2:06:32 AM EST
/b/tards must be out of things to randomly post and had to come screw with us.
Link Posted: 6/18/2009 2:07:06 AM EST
This thread is hard to masturbate to.
Link Posted: 6/18/2009 2:11:18 AM EST
Originally Posted By OhioLibertarian:
/b/tards must be out of things to randomly post and had to come screw with us.


Seriously, right!!! Obviously he is not aware that arfcom GD is for serious business.

OP,
stop being a chode and post us something scientific or with math and shit in it.

Link Posted: 6/18/2009 2:12:17 AM EST
Originally Posted By Rincon_11:
This thread is hard to masturbate to.


You're doing it wrong.
Link Posted: 6/18/2009 2:19:00 AM EST
Originally Posted By Rincon_11:
Originally Posted By OhioLibertarian:
/b/tards must be out of things to randomly post and had to come screw with us.


Seriously, right!!! Obviously he is not aware that arfcom GD is for serious business.

OP,
stop being a chode and post us something scientific or with math and shit in it.



A mil-spec buffer tube cross section is 1.14" in diameter. A commercial buffer tube cross section is 1.17" in diameter. From these previous statements we can logically come to the conclusion that a commercial stock will fit on a mil-spec tube ( albeit with some rattling), but a mil-spec stock will NOT fit on a commercial tube.

Link Posted: 6/18/2009 2:20:18 AM EST
Yea, I have the same problem getting .308 into my ar's.

Link Posted: 6/18/2009 2:29:26 AM EST
Originally Posted By LinggrrLonggrr:
Originally Posted By Rincon_11:
Originally Posted By OhioLibertarian:
/b/tards must be out of things to randomly post and had to come screw with us.


Seriously, right!!! Obviously he is not aware that arfcom GD is for serious business.

OP,
stop being a chode and post us something scientific or with math and shit in it.



A mil-spec buffer tube cross section is 1.14" in diameter. A commercial buffer tube cross section is 1.17" in diameter. From these previous statements we can logically come to the conclusion that a commercial stock will fit on a mil-spec tube ( albeit with some rattling), but a mil-spec stock will NOT fit on a commercial tube.



Now that is something I can fap too!!!!!








AAAAAAAAHHHHHHHHHHHHHHHH, sweet, sweet release.

Link Posted: 6/18/2009 2:33:54 AM EST
That's all right, I once saw a dumbass have a melt down at a Wal-Mart customer service desk because the CROSSMAN AIR RIFLE he purchased advertised that it came with both .177 and .22 caliber barrels but you can't fit a .22 (rimfire) in either barrel He then proceeded to demonstrate with a live round of .22LR that it indeed would not chamber into either barrel

The WalMart clerk (who knew obviously nothing about air guns, GCA'68 or .22rimfire) said she couldn't give him his money back because the computer said all air gun sales were final. He ranted for a few more minutes that he wanted to go back to the sporting goods isle and open another boxed air rifle and take the barrel for .22 rimfire from that since he obviously got two pellet barrels. The story gets even more hilarious when he rants that since they refused to sell him the Ruger he wanted, he settled on the Crossman with the .22 barrel because "that is how you get around the paperwork"
Link Posted: 6/18/2009 3:05:01 AM EST
Originally Posted By sporter:
Try it.


post pics!
Link Posted: 6/18/2009 3:26:33 AM EST
[Last Edit: 6/18/2009 3:27:27 AM EST by MTUSA]
Schools out for summer.
Only 3 more months of this shit
Link Posted: 6/18/2009 3:27:39 AM EST
Originally Posted By LinggrrLonggrr:
They don't fit. It says .357 on the fucking barrel.



this is a thursday haha joke right?
Link Posted: 6/18/2009 3:34:17 AM EST
Some guy sold me some ".308 Long" ammo, said it was more powerful. Found out the hard way it was actually .30-06. Boy was I pissed when it jammed up my FAL.




Link Posted: 6/18/2009 3:45:56 AM EST
Originally Posted By NathanJK:
Originally Posted By Keith_J:
You cannot be serious.



I cannot possibly believe this is for real.


I hope this is the case, but there are enough mouth breathers out there that this could be true.
Link Posted: 6/18/2009 4:03:08 AM EST
I have the same problem making .223 rounds fit in my Remington 597. I mean, the bullet is only .003 wider than a .22 so it should work, right?
Link Posted: 6/18/2009 4:06:06 AM EST
I contemplated what a .357 Sig revolver would be like.

I want one...
Link Posted: 6/18/2009 11:31:57 AM EST
Originally Posted By wardog513:
Originally Posted By LinggrrLonggrr:
They don't fit. It says .357 on the fucking barrel.



this is a thursday haha joke right?


Yes, it's a joke.
Link Posted: 6/18/2009 11:35:56 AM EST
Pics or GTFO!!!!!








While we're on the subject. How come I can't shoot .308 in an AK. They're both 7.62??
Link Posted: 6/18/2009 11:36:23 AM EST
Is this a joke?
Link Posted: 6/18/2009 11:36:34 AM EST
You're not smart enough to own guns.
Link Posted: 6/18/2009 11:37:20 AM EST
Cram it in there. It will go if you push hard enough.
Link Posted: 6/18/2009 11:39:46 AM EST
It won't work without the special hammer
Link Posted: 6/18/2009 11:40:34 AM EST
[Last Edit: 6/18/2009 11:48:37 AM EST by America-first]
Originally Posted By theBUBBAMANcan:
How about because the .357 Sig is based on a necked-down .40 case. That's why it won't fit.

ETA: To my understanding the .357 Sig is a .40 S&W necked down to accept a 9mm bullet.


Necked down 10mm case.

The .357 SIG isn't actually .357 caliber either.

And the OP is trolling.
Link Posted: 6/18/2009 11:42:28 AM EST

Originally Posted By HK_Shooter_03:
I contemplated what a .357 Sig revolver would be like.

I want one...

Only high-intensity bottle-necked cartridges are the ultimate failure in a revolver. They lockup the cylinder on the first shot. Unless you keep pressure lower than 25,000 PSI.


Link Posted: 6/18/2009 11:43:12 AM EST
Are you for real?
Link Posted: 6/18/2009 11:48:55 AM EST
Originally Posted By Dumpster_Baby:
Some guy sold me some ".308 Long" ammo, said it was more powerful. Found out the hard way it was actually .30-06. Boy was I pissed when it jammed up my FAL.






So you bought an FAL chambered in .30-06 Kurz?

What a nimrod!

Link Posted: 6/18/2009 11:51:23 AM EST
Originally Posted By LinggrrLonggrr:
Originally Posted By bruce21b:
what a dumb-ass troll question.....

why dont you try stuffing a .50AE cartridge in that .357??? it will fit, just beat it in with a sledgehammer


Eat a dick. I guess you didn't see where I said I was joking.


Nicccccccce!!!

Arrow Left Previous Page
Page / 2
Top Top