Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 8/2/2002 6:41:29 AM EST
OK I sold off my one and only 1911 (Kimber) at the beginning of the summer and want another 1911. This time, I've decided to make an attempt at putting one together myself. My first question would be where to get the parts, frame, etc, etc? My other question would be about finding references on how to put one together? Thanks
Link Posted: 8/2/2002 6:44:57 AM EST
The frame, being the serial-numbered part, is legally the firearm and must be purchased through a licensee. Everything else you can get by catalog. Brownells, Midway, and most of the major customizers sell the components - slides, barrels, bushings, pins, hammers, triggers, so on and so forth.
Link Posted: 8/2/2002 6:50:00 AM EST
[Last Edit: 8/2/2002 7:05:20 AM EST by BeauBeaux]
Caspian [smoke] http://www.caspianarms.com/ Edit: to add link
Link Posted: 8/2/2002 8:20:03 AM EST
The best book is Jerry Kuhnhausen’s “The Colt .45 Automatic, A Shop Manual”. It doesn’t specifically address building one from scratch, but it has all the answers. He has added second volumn to this; I forget the exact name. Ed Brown’s “1911 Bench Reference” is also pretty good, but not as good as Kuhnhausen’s. Wilson also has one, but I don’t care too much for it. Wilson also has a maybe 4 or 5 VHS video set on 1911 building that Brownells carries. I’ve never seen it, so I don’t know if it’s any good – it is expensive! Save yourself a lot of trouble by buying quality parts!
Link Posted: 8/2/2002 11:04:49 AM EST
I'm thinking of building one myself. You can get [b]everything[/b] you need from [url=www.brownells.com]Brownells[/url]. I want to buy a matched frame ans slide set.
Link Posted: 8/2/2002 1:24:42 PM EST
Yet another choice: [url]www.danwessonfirearms.com/1911kits.HTM[/url]
Link Posted: 8/2/2002 3:37:40 PM EST
The frame (lower) is technically the firearm. Everything else is parts. get a [url]www.brownells.com[/url] catalog and start looking through it. They have any part or gunsmithing tool you could ever need. Find a good local dealer to get the frame. When I was younger, I tried to cut corners and use alot of cheap parts. after they broke, I spent money again on good parts. Have fun and do it right.
Link Posted: 8/2/2002 3:51:33 PM EST
If you have a C&R you could get an argentine colt clone. There's a good website out there where I guy takes two of these argentine pistols and custimizes them. I can't find the link.
Link Posted: 8/2/2002 3:54:36 PM EST
There is a web site that explains the whole thing in a very simple and straight forward manner. I have the link stuck away somewhere. Search around a little maybe you can locate it.If not e me
Top Top