Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Member Login

Posted: 4/20/2007 8:41:26 AM EST
Where can I find T-304 exhaust pipe? I just need a few feet of it, and most auto parts stores only have the aluminized garbage. McMaster appears to carry regular T304 pipe (not available in automotive exhaust pipe sizes).
Link Posted: 4/21/2007 6:21:50 AM EST
It'll be pretty hard to find on the shelf as well as just a few feet. I install T304 & 316L tubing/process piping everyday. If your in Washington state let me know I can hook ya up. Good luck !
Link Posted: 4/21/2007 7:37:54 AM EST
Link Posted: 4/21/2007 8:22:12 AM EST
It doesn't look like Borla carries 2" pipes

Where does your shop generally buy the T304 pipes? Local suppliers?
Link Posted: 4/21/2007 6:07:22 PM EST
I know some comes from back east & Canada. I would look for shops doing sanitary piping ( food/brewery/Coke/Pepsi ect.), they'd have rems around the shop. Distributors of sanitary piping, Andron fittngs. Here's a link to the type of piping we do :

link

Good luck !
Link Posted: 4/21/2007 6:32:38 PM EST
What size(diameter and wall thickness), and how much do you need? If the lengths aren't too much, it's UPS-able.
Pete
Link Posted: 4/22/2007 2:08:29 AM EST
I'm not sure but i think there is a difference between T304 used in breweries and bakeries, versus auto exhaust pipes. For example, I need 2" OD with about Schedule 10 thickness. McMaster only shows 1.9" OD for 2" pipes.
Link Posted: 4/22/2007 6:21:52 AM EST

Quoted:
I'm not sure but i think there is a difference between T304 used in breweries and bakeries, versus auto exhaust pipes. For example, I need 2" OD with about Schedule 10 thickness. McMaster only shows 1.9" OD for 2" pipes.


There will be a difference in od from pipe to tube, other than that it should be std. Industrial and foodstuffs convey piping is usually pipe, as in the sch 10, sch 40 pipe, although they do use tubing as well. Just depends on the convey rate they need.
Auto tube should be a std tube diameter of 1.5"- 1.75"-1.875"-2"-2.25"-2.5"-3"-etc.
I carry much of it, and can get any of it, but it sure isn't cheap anymore. Heck even my scrap stainless brings almost $1.5/lb.
Just let me know what size you want, and how much, and I'll get you a price. If you want to spend some more $, I can get T316, as well.
Link Posted: 4/22/2007 7:18:21 AM EST
We use tube on all process piping & pipe on stuff like chill water, glycol to the presses.
Sounds like repeat has ya covered. Good on ya Repeat !
Link Posted: 4/22/2007 7:52:37 AM EST
www.burnsstainless.com
Link Posted: 4/22/2007 10:59:02 AM EST
Good call - I checked McMaster and there is a definite difference between stainless pipe (2" = 1.90" OD) and stainless tubing (2" OD = 2" OD). The prices for SS tubing don't seem so bad (~$5/ft').
Top Top