Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Arrow Left Previous Page
Page / 2
Posted: 11/19/2011 6:28:33 PM EDT
I'm looking at getting a new rifle the next few weeks, was considering a Remington 700 SPS Varmint in a .243 win.

How about you?
Link Posted: 11/19/2011 6:29:35 PM EDT
I got 2 AK kits I will be getting done in the spring.

After that will probably be some kind of semi .308.
Link Posted: 11/19/2011 6:30:36 PM EDT
Probably an M-16, when I save enough!

39
Link Posted: 11/19/2011 6:31:59 PM EDT
[Last Edit: 11/19/2011 6:34:09 PM EDT by MINOBARN]
7" AR 47

Link Posted: 11/19/2011 6:32:13 PM EDT
A precision bolt gun of some sort. Undecided as to what caliber or specific rifle at this point.
Link Posted: 11/19/2011 6:33:32 PM EDT
Ar-10 in 308, probably Armalite
Link Posted: 11/19/2011 6:34:36 PM EDT
GAP Thunder Ranch

At least it's my next INTENDED rifle - but since my deposit placed on Tuesday only gets me on a 5 month waiting list, I can't guarantee it will actually BE my next rifle.

We'll see.
Link Posted: 11/19/2011 6:36:22 PM EDT

Originally Posted By HiredHitman:
A precision bolt gun of some sort. Undecided as to what caliber or specific rifle at this point.

Let me know what you decide, I was pretty much going for something similar, I think I'm going with the .243 since its so versatile.
Link Posted: 11/19/2011 6:37:38 PM EDT
prob M1A
Link Posted: 11/19/2011 6:37:52 PM EDT
[Last Edit: 11/19/2011 6:38:26 PM EDT by dcs12345]
I really want an AR-10 or a bullpup, so my next rifle will mostl likely be another cheap milsurp.
Link Posted: 11/19/2011 6:38:01 PM EDT
Top of the list is an AES-10B RPK or a Rossi .357 lever action, 16" stainless.
Link Posted: 11/19/2011 6:38:05 PM EDT
Savage .308

Link Posted: 11/19/2011 6:38:18 PM EDT
White Oak Precision CMP upper, Krieger, 1/4 MOA sights, float tube. Arrival ETA 12-13 wks.
Link Posted: 11/19/2011 6:38:23 PM EDT
Lots of AR15's and an AR10 that needs to be finished before I buy anything else.
Link Posted: 11/19/2011 6:39:17 PM EDT
Bull BBL 700 in .308. I'm looking at the 700 Tacticool 20"
Link Posted: 11/19/2011 6:40:16 PM EDT
It's sitting at my FFL: A Marlin 1895GBL .45-70. It will be off to Grizzly Custom by next week.

If I had winter tires on my car, I would have picked it up today.

m
Link Posted: 11/19/2011 6:40:26 PM EDT
Probably a bolt gun in .308. Currently leaning towards either a Tikka T3 Hunter or a Thompson/Center Icon.
Link Posted: 11/19/2011 6:40:38 PM EDT
I've got a bad case of Mosinitis, so it will probably be another Mosin of one variety or another.
Link Posted: 11/19/2011 6:41:11 PM EDT

Originally Posted By yagotme:
White Oak Precision CMP upper, Krieger, 1/4 MOA sights, float tube. Arrival ETA 12-13 wks.

I have one of those on an RRA lower. You'll love it. The other AR is a Compass Lake. :-)

m
Link Posted: 11/19/2011 6:42:08 PM EDT
I do have another stripped lower that I need to come up with a plan for.

Link Posted: 11/19/2011 6:42:40 PM EDT
either one of these:

Arsenal SGL21 AK 7.62x39
Tikka T3 Hunter or Remington 7600 30-06
Savage 11FCNS 243
another Lee Enfield No4 Mk1––––-specifically a Savage built Lend Lease rifle
Link Posted: 11/19/2011 6:42:46 PM EDT
Originally Posted By ziggiey:
Ar-10 in 308, probably Armalite


My latest is an AR-10 in a2 config had it about a week now just got some factory mags from Armalite this week. You wont be sorry.
Link Posted: 11/19/2011 6:42:49 PM EDT
Either a AUG A3 or a SCAR 17...
Link Posted: 11/19/2011 6:42:51 PM EDT
im hoping to pick up something blackpowder for under $100 on black friday
Link Posted: 11/19/2011 6:42:52 PM EDT
Tikka T3 has been on my list for a while. Just don't know whether to go .223 or .308. I know the .308 can reach out there, but for practicality, .223 is plenty for me. Decisions Decisions.
Link Posted: 11/19/2011 6:43:02 PM EDT
Mega Ma-Ten (308 ar). Just need Rainer to get some parts in and then I will finish it. If the ATF would hurry up and approve my stamps, I would complete some SBRs.
Link Posted: 11/19/2011 6:43:28 PM EDT
Debating whether to have my Polish AKMS parts kit sent off to be built or get a barrel and stock for my AR (m4gery) to complete it.
Link Posted: 11/19/2011 6:43:36 PM EDT
SPR/Mk12-ish type thing. Unfortunately, it'll probably be sans-suppressor until I can pay for the rifle
Link Posted: 11/19/2011 6:43:45 PM EDT
14.5" carbine build for an acog
Link Posted: 11/19/2011 6:43:47 PM EDT
My next TWO will be a Kel-Tec Sub 2000 in Glock 9mm and then an Fn Scar17.
Link Posted: 11/19/2011 6:45:14 PM EDT
Originally Posted By Mop89:

Originally Posted By HiredHitman:
A precision bolt gun of some sort. Undecided as to what caliber or specific rifle at this point.

Let me know what you decide, I was pretty much going for something similar, I think I'm going with the .243 since its so versatile.


Same here, on a 700 short action likely....................

Link Posted: 11/19/2011 6:45:23 PM EDT
Link Posted: 11/19/2011 6:48:17 PM EDT
Link Posted: 11/19/2011 6:48:29 PM EDT
Wildcat caliber AR for hunting.
Link Posted: 11/19/2011 6:48:59 PM EDT
Link Posted: 11/19/2011 6:49:11 PM EDT
LaRue OBR 7.62 18"
Link Posted: 11/19/2011 6:49:58 PM EDT
C&R rifle probably

M39
Enfield
91/30 sniper

Already have a M44 on the way
Link Posted: 11/19/2011 6:52:03 PM EDT
scar16
Link Posted: 11/19/2011 6:52:45 PM EDT
[Last Edit: 11/19/2011 6:56:12 PM EDT by Sslous]
Glock 7 not sure if I should go for rough textured or glass finish though.








ooops... it says rifle.
Link Posted: 11/19/2011 6:53:18 PM EDT

Originally Posted By Sslous:
Glock 7 not sure if I should go for rough textured or glass finish though.

Patrick Swayze in Ghost ceramic or go home!
Link Posted: 11/19/2011 6:54:16 PM EDT
ruger gunsite scout rifle
Link Posted: 11/19/2011 6:54:20 PM EDT
A cheap Savage or Remington with Iron sights and a 1.5X to 4X power scope, chambered (or more likely rechambered) in 358 win (.308 win necked up to 9mm, can reload everything from powderpuff 125 grain LRN at 700 FPS all the way up to 325 grain solids at 2800 FPS, basically within spitting distance of 375 H&H.) I want to use it on bear here in Cali.
Link Posted: 11/19/2011 6:54:59 PM EDT
Got bored waiting on a form 4 (suppressor), so I bought a .22 Henry yesterday.
Link Posted: 11/19/2011 6:56:15 PM EDT
SCAR 17 or a new T/C Pro Hunter.
Link Posted: 11/19/2011 6:56:27 PM EDT
There is a used Thompson Center Big Bore .58 caliber percussion rifle for sale at a local gunshop. I am tempted to buy for use with heavy conicals.
Link Posted: 11/19/2011 6:56:42 PM EDT
Originally Posted By warp_foo:

Originally Posted By yagotme:
White Oak Precision CMP upper, Krieger, 1/4 MOA sights, float tube. Arrival ETA 12-13 wks.

I have one of those on an RRA lower. You'll love it. The other AR is a Compass Lake. :-)

m


My old Colt is getting long on the mileage, won't hold a good 600 yd group, gonna retire it to the 200 yd shoots. Put the W/O with my 24" RRA varminter, and have "2" guns in one case, one for ATC and one for F-class.
Link Posted: 11/19/2011 7:00:36 PM EDT
Need to add a stainless steel barrel and forearm to an already built lower. Plus add a Burris scope and rings.
Link Posted: 11/19/2011 7:03:08 PM EDT
Originally Posted By 9mmRandy:
Bull BBL 700 in .308. I'm looking at the 700 Tacticool 20"


I love my SPS Tactical and highly recommend one. I replaced the hogue stock with a B&C lightweight tactical stock
Link Posted: 11/19/2011 7:19:07 PM EDT
I handled at a Century HK93 clone at Bud's the other day. I was actually pretty impressed with the quality. So probably one of those.
Link Posted: 11/19/2011 7:20:26 PM EDT
[Last Edit: 11/19/2011 7:23:25 PM EDT by Quintin]
Link Posted: 11/19/2011 7:21:56 PM EDT
A pink AR... My daughter turned 1...
Arrow Left Previous Page
Page / 2
Top Top