Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 8/27/2002 3:33:22 AM EST
Steve, Not too long ago there was a thread about putting a collapsable stock on a post-ban gun and permanently pinning the stock to one position. The thread contained a copy of a letter that the BATF sent a member in reference to the legality of doing this. Does this ring a bell?
Link Posted: 8/27/2002 10:05:49 AM EST
[Last Edit: 8/27/2002 10:13:07 AM EST by Steve-in-VA]
Link Posted: 8/27/2002 3:58:53 PM EST
[Last Edit: 8/27/2002 4:00:00 PM EST by Kope]
This one [url]http://www.ar15.com/forums/topic.html?b=1&f=6&t=137289&w=searchPop[/url]
Link Posted: 8/27/2002 5:22:27 PM EST
[Last Edit: 8/27/2002 5:23:23 PM EST by VA-gunnut]
Link Posted: 8/28/2002 2:24:17 AM EST
Link Posted: 8/28/2002 6:48:00 AM EST
Link Posted: 8/28/2002 8:42:09 AM EST
[Last Edit: 8/28/2002 8:43:27 AM EST by 223Rem]
Forest, Thanks for the heads-up and I definitely see your point. I guess it will take another letter to the BATF to determine what "Welding" consists of. In the meantime, I have a solution similiar to installing a permanent muzzlebrake, which can be welded. Once I find the desired position of the telestock for my girlfriend, I will drill a hole (or two) thru the lower portion of the stock and tube. I will use a rivot to hold the stock in place and weld the anchor end of the rivot. This make it permanent unless I drill out the rivot. Plus the rivot will flush nicely against the stock and if by some chance the AW ban is lifted or modified, I can drill out the rivot, proxy the holes in the stock and I am good to go with a collapsibe stock. PS. Thanks VA-gunnut
Top Top