Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 6/22/2003 2:16:06 PM EST
1) Rifle must be 26" min. 2) Rifle barrel must be 16" min. (Add quarter inch to keep wife alive) Q: Is "shoulder fired" open to interpretation? Could one put this on a rifle and [i]if[/i] you meet 1 & 2 above be legal? [img]http://www.allaccesscredit.i8.com/pistolbuffer.jpg[/img] [b]THANKS![/b]
Link Posted: 6/22/2003 2:43:43 PM EST
Link Posted: 6/22/2003 5:15:54 PM EST
[Last Edit: 6/22/2003 5:27:17 PM EST by CavVet]
Originally Posted By Troy: Yes, it's open to interpretation... BATF's interpretation, not yours.
View Quote
ROFLMAO....well at least thats not as bad as the answer I expected.... Im gonna have to start shopping some stock pad end thingys.... I am seeing the same picture.... [img]http://home.attbi.com/~molaligne/hkcollapse9.jpg[/img]
Link Posted: 6/25/2003 12:15:51 AM EST
Does the ATFE make special exceptions? It would seem that guns like the 1919A4 would be definitely classed as non-rifles if the shoulder fired bit were critical.
Link Posted: 6/26/2003 4:52:17 AM EST
Well, I am also told the new Oly OA98-PT has a removeable stock, so now I dont know....
Link Posted: 6/26/2003 7:01:42 PM EST
[Last Edit: 6/26/2003 7:02:41 PM EST by Andreuha]
Originally Posted By CavVet: Well, I am also told the new Oly OA98-PT has a removeable stock, so now I dont know....
View Quote
Perhaps you can just replace machinegun and component with rifle and stock. Like how the ATF puts it. "Posession of a rifle can be classified as posession of a firearm, and a stock, which when assembled will produce a rifle". How's that? [;D]
Link Posted: 6/27/2003 11:11:40 AM EST
So, what's with the second pic post? I only see about 1/3 of the pic. What is it?
Link Posted: 6/30/2003 10:35:28 PM EST
Possession of a machinegun, or all the components to make one, is specifically regulated by the NFA of 1934. Not so non-NFA firearms. Possesion of a stock, which will not "attach" to an AOW (meaning if you didn't hold them together, they'd fall apart), should not be a problem. If one wanted an AR-15 AOW, and built a padded socket they strapped to their shoulder into which the receiver extension of the AOW would fit, I can't see how that could be considered a stock. I could be wrong, but that's my take.
Top Top