Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/31/2006 5:08:09 PM EST
For service rifle dry fire practice I need to print a black dot that will approximate the aiming black at a real match. I will be at dry fire distance of 10'.

I figured .217 inches but not sure if I'm correct..
Link Posted: 3/31/2006 5:33:07 PM EST
Anyone?
Link Posted: 3/31/2006 5:36:49 PM EST
How big is the bull at full distance, then do the distance ratio and multiply the fraction times the original diameter Got that?
Link Posted: 3/31/2006 5:38:54 PM EST
36"@600 yards..
Link Posted: 3/31/2006 5:45:08 PM EST

Originally Posted By Valkyrie:
36"@600 yards..



600 yards is 1800 ft.

You're shooting at 10 ft., so divide 36" by 180. 0.2" is what I get.

(That's some mighty tiny!)


Link Posted: 3/31/2006 5:45:26 PM EST
[Last Edit: 3/31/2006 5:46:29 PM EST by boltmaster]
0.2 inches at 10 ft.


ETA: Heck! I'm too slow.
Link Posted: 3/31/2006 5:46:44 PM EST
[Last Edit: 3/31/2006 5:47:15 PM EST by Mall-Ninja]
36" @ 600 => 6" at 100 => 0.6" at 10 yards => 0.2" at 10 feet?
Link Posted: 3/31/2006 5:50:33 PM EST
Thanx guys.. I got .216" using a 9 inch reduced target.. But the discrepency isn't gonna make much differnece.
Top Top