Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 8/12/2002 4:51:40 PM EST
Thats worth a fifty dollar bill, isn't it? Scope seems to be a 4x. Everything else is clean and well taken care of. But theres no checkering. A guy I work with wants to sell it. Whaddya think?
Link Posted: 8/12/2002 4:53:24 PM EST
Link Posted: 8/12/2002 4:53:59 PM EST
I would say so. I had one a while ago, good little rifle.
Link Posted: 8/12/2002 4:55:56 PM EST
Yup,and some will really shoot with the right load.
Link Posted: 8/12/2002 5:58:49 PM EST
I had one! I paid $50 for it 20 years ago! Buy it! If you dont like it I will take it off your hands! They are great guns!
Link Posted: 8/12/2002 6:07:14 PM EST
My personal opinion of this gun based on the one I own: It's no 10/22 in the accuracy dept, but it'll do the job as far as cans and squirrels go. This may be due to the micro groove rifling, it doesn't foul easy, but IMHO may not bite the bullet good enough. It seems to be much more accurate with cool and heavy loads, but handles hotties well too. It functions flawlessly until around 250rds. Cleans up real easy and is easy to maintain. The selfloading/hammer mechanism is all one assembly on rails and it just comes out in one piece to be sprayed off. I think I agree with the engineer's thoughts as far as design and construction goes with exception to the plastic pin that holds this assy. in. Have to be careful of the plastic trigger assembly, mine has cracked twice and now it has mini screws in it holding it togeather. The finish seems to be good-n-tough. When disassembling - remove the rear trigger guard screw first, then the big one out front. This will help in preserving the plastic trigger assy. IMHO it's worth the $50. Mine is the Youth model with the little brass medallion in the stock and it's tube fed. I think it was around $150 new, but I can't remember.
Top Top