Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 11/19/2001 12:45:48 PM EST
I'm looking at buying some Lee reloading gear. Does anyone here have any experience with Lee reloading equipment.
Link Posted: 11/19/2001 12:47:35 PM EST
I'll be the first to say be more specific What gear? I use Lee dies and they work great! I have a hand press, since I live in an apartment, that works fine. a few other little odds and ends, and it's good stuff, IMHO
Link Posted: 11/19/2001 12:55:13 PM EST
I'm looking at the die's, press, powder dispencer, and a few other small things
Link Posted: 11/19/2001 12:57:46 PM EST
Link Posted: 11/19/2001 12:59:07 PM EST
Their dies are great... I've used the 3 die rifle and pistol sets, and the rifle collet die set, and have had great luck with them. Don't know much about their other stuff, but they're a good company, so it seems. I hope you know about Midway USA... a reloaders' heaven [url]www.midwayusa.com[/url]
Link Posted: 11/19/2001 1:05:14 PM EST
I've been reloading using the Aniversary kit for about a year now. Works great for me. For a low-cost kit to get you started in reloading, it is hard to beat.
Link Posted: 11/19/2001 1:08:54 PM EST
You haven't had the traditional "New Reloader" experience till you have made some ammo on the Lee Loader, and hammered too hard during the primer seating operation. I prefer RCBS dies, all the way around. My .30/06 Lee dies use friction(for Pete's sake) to secure the decapping rod. Everything LEE makes works, but RCBS is worth the xtra $, to me. LEE bullet moulds? "Mikey Likes It."
Link Posted: 11/19/2001 1:27:29 PM EST
Link Posted: 11/19/2001 1:37:57 PM EST
How does the Lyman stuff compare to Lee and RCBS?
Link Posted: 11/19/2001 1:38:28 PM EST
Ok, before the "Lee is crap" people start weighing in... I have Challenger press and several Lee dies along with Hornady and RCBS. I also have a Lee Autoprime. I bought the press in an "Anniversary" kit back about 1987 or so. I managed to finally break it about 1999. The cheap pot-metal casting used to connect the steel lever to the press ram failed during full-length resizing of .303 British brass. Apparently a common failure, that part has been redesigned. And apparently it still occasionally fails. My opinion of the Challenger press? For about $35.00 it can't be beat, but if you've got about $100, get something better. Mine still works, and I still use it. For priming, I haven't seen anything I like better than the Autoprime. For neck-sizing, I'll take Lee's collet dies hands-down over anything else. For standard sizing & seating dies I haven't found Hornady or RCBS to be significantly better than Lee. Others might. Especially if those others are precision benchrest shooters (which I am not) and in which case they would stay away from Lee anything anyway. If you're a first-time reloader, or on a tight budget (or both) a Lee Anniversary kit is a helluva deal. Oh, and I have no personal experience, but I've been told the "Perfect Powder Measure" ain't.
Link Posted: 11/19/2001 1:42:47 PM EST
My Bro. has a Lyman O-frame press, and some dies. It looks like good quality to me. I like Lyman, RCBS and LEE bullet moulds. My 32 year old RCBS O-frame press just keeps cranking along. Thank you, American Quality.
Link Posted: 11/19/2001 1:53:26 PM EST
I will just say Ditto to everything The Beer Slayer had to say. I use their Kit for .308 and using IMR4064 was a pain....One load right one and dump the next 5 due to the powder measure. A lot ov value to that package deal however. Karsten
Top Top