Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Posted: 10/2/2007 2:12:24 PM EST
The ice maker in my refrigerator (Kitchen Aid) has overflows when filling. Does anyone know how to check these out? How does it signal the solenoid to turn off?
Link Posted: 10/2/2007 8:30:25 PM EST
If its the ones that go in an over under and is the rectangle style. Pop off the front there is a slot around the front cover use a flat head screwdriver. Then you will see a screw with a spring. It will indicate wich way to turn for more or less. Turn the screw a couple of turns to minus direction for less water or smaller cubes.
Link Posted: 10/3/2007 4:53:01 AM EST
Link Posted: 10/9/2007 10:46:33 AM EST
Mine does it too with the setting all the way to the - setting. My water pressure is high and I haven't found a suitable regulator for just the icemaker. I really don't want to lower the pressure to my house..........

I tried installing a needle valve and closing it almost all the way, but that didn't help.
Top Top