Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 5/18/2003 11:30:13 AM EST
[Last Edit: 5/18/2003 11:30:50 AM EST by ComputerGuy]
I need four 1/2" barrel nuts. They are also known as t nuts. I've looked all over and can't find any (unless I want to buy 10,000 of them). They're for the bottom of a pool table.. Thanks
Link Posted: 5/18/2003 12:15:09 PM EST
You should have no problem finding T-nuts at any hardware store. However, if you have a (don't freak on this comment) bolt &screw supply, that would be better. There is a national chain of which we have one here in Nashville called Scott Bolt and Screw. If that doesn't work, check woodworking supply stores. You may have to go mail order. You may also want to try some local specialty woodwork shops that do custom woodwork and they should be able to help you. Don't forget, in addition to bore, you need length and thread for those nuts.
Link Posted: 5/18/2003 12:29:39 PM EST
Robnett's Hardware in Corvallis McDonald fastener in Albany Eugene Fastener in, where else, Ewwwwwgene
Link Posted: 5/18/2003 12:50:33 PM EST
[Last Edit: 5/18/2003 12:59:04 PM EST by AZMAN-1]
If you can't find them localy, go mail order,at www.McmasterCarr.com they have EVERYTHING!! and ship quickly too. Edit to add, try page 2977 of their online catalog, you can buy them per each.
Link Posted: 5/18/2003 12:54:12 PM EST
taking bets on a pool table accident here....
Link Posted: 5/18/2003 1:12:11 PM EST
Link Posted: 5/18/2003 1:14:33 PM EST
If you're in the Portland metro area or nearby call Golden West Billiard supply on Johnson Cr Blvd in Milwaukie 503 788-1278, They build tables and have all kinds of hardware, they should have anything you need.
Link Posted: 5/18/2003 1:17:34 PM EST
Thanks for the advice! I've checked hardware stores, etc etc, and none of them have them in 1/2"...
Link Posted: 5/18/2003 1:30:36 PM EST
CG Call Grainger they will have them and ship the nuts to you.
Link Posted: 5/18/2003 3:21:13 PM EST
I was going to suggest the Democratic Party, but I see you need nuts that perform a useful function. [:D]
Link Posted: 5/18/2003 4:44:21 PM EST
[Last Edit: 5/18/2003 4:44:46 PM EST by DnPRK]
order online from McMaster-Carr [url]http://www.mcmaster.com/[/url]
Top Top