Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 2/21/2007 7:39:17 AM EST
How do you remove the blades from these things? I've never had to & am finding it to be difficult. I think it might be stuck. The rear "wheel" says < RELEASE BLADE < but it's spring loaded & a b!tch to move. Is it suppose to kick the blade out or do I need something to pull it?
Link Posted: 2/21/2007 12:30:43 PM EST
twist the wheel enough and it will fall out.
Link Posted: 2/24/2007 10:17:16 AM EST
Are you trying to remove the spare blade or the usable blade?

To remove the usable blade push down, twist counter-clockwise(?) and pull out.

The rear "wheel" is to remove the spare blade, if there is one, stored in the butt. Hold the tool upside down, turn the wheel, blade should fall out.
Link Posted: 2/26/2007 7:31:05 PM EST

Originally Posted By Dracster:
Are you trying to remove the spare blade or the usable blade?

To remove the usable blade push down, twist counter-clockwise(?) and pull out.

The rear "wheel" is to remove the spare blade, if there is one, stored in the butt. Hold the tool upside down, turn the wheel, blade should fall out.


Yup. And each blade will have a cutting and a non-cutting side. It's a good idea to leave the noncutting side out when you're not using the tool to keep the blade sharp.
Top Top