Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
1/22/2020 12:12:56 PM
Posted: 11/19/2012 5:53:35 PM EST
[Last Edit: 11/19/2012 5:59:50 PM EST by GoatHerder]
I am posting here a tutorial on how to make these cool littleguys.

Materials needed:
- G10 in thicknesses of 5/8" or more
- Dremel or foredom type tool
- 1/2" sanding drum attachment
- tapered pointed diamond burr
- 400 grit wet dry sandpaper
- 5 minute epoxy
- green high glow industrial powder
- chopstick or other tapered stick
- 1/4" drill bit



Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us


Uploaded with ImageShack.us
Use the sanding drum to make vertical random ridges


Uploaded with ImageShack.us
Wet rough sand


Uploaded with ImageShack.us
Mix epoxy and glow powder with as much powder as will still mix together


Uploaded with ImageShack.us
GITD in the dark


Uploaded with ImageShack.us
Link Posted: 11/19/2012 6:11:43 PM EST
That's pretty good, how long did it take?
Link Posted: 11/20/2012 3:33:57 PM EST
Start to finish on 3 of them is an hour.
Top Top