I posted some of these in ARDisc, but I had to throw a couple of them up here.

Not totaly finished, but we'er get'in there.

Rock River Mid-lenght Carbine

[img]http://img.villagephotos.com/p/2003-6/243821/DCP_0008.JPG[/img]

[img]http://img.villagephotos.com/p/2003-6/243821/DCP_0009.JPG[/img]

[img]http://img.villagephotos.com/p/2003-6/243821/DCP_0001.JPG[/img]

and some more picks...

[img]http://img.villagephotos.com/p/2003-6/243821/DCP_0002.JPG[/img]

[img]http://img.villagephotos.com/p/2003-6/243821/DCP_0017.JPG[/img]

[img]http://img.villagephotos.com/p/2003-6/243821/DCP_0012.JPG[/img]

you need a beter host....

What pics. ?

Are the pics not up? they posted on my computer?

I see the first set, but not the second set.

That's the pits, It took a couple of minutes for the first set to link

Lets try again...

I'll even give you the dreaded

Mall Ninja pic...Oh the horror

[img]http://img.villagephotos.com/p/2003-6/243821/DCP_0026.JPG[/img]

Red [img][/img]

Ok...I just went into my host and bought 20x more bandwidth for about $6.00

AR15.members suck up bandwidth pretty quick

Lets hope that fixs the problem.

pics work here... btw nice gun, and you look almost like a real JBT...lol

nice rifle!

My girlfriend is getting tired of taking these pictures.

I believe her exact words were " I'm sick of this s**t, lets go get some ice cream."

[img]http://img.villagephotos.com/p/2003-6/243821/DCP_0024.JPG[/img]

Ok...I just opened my E-mail and discovered a couple of requests to know what kind of vest that is.

The answer is...It's a cheap asian knock off vest made in Taiwan.

It's the Tac Force vest, brought to us by the good people at ASPI Tactical for about $53.00 plus shipping (See the industy forum here on AR15.com for a quick link to ASPI Tac)

I have enclosed a couple of pictures, because the vest you actualy get from ASPI, differs slightly from the picture provided in ASPI's webpage catalog.

[img]http://img.villagephotos.com/p/2003-6/243821/DCP_0032.JPG[/img]

[img]http://img.villagephotos.com/p/2003-6/243821/DCP_0033.JPG[/img]

I'm planning a review of this cheap vest soon outlining a couple of quick fixes for those who are not opposed to sewing in order to build a vest and pinch a few bucks off the price of a Blackhawk, Eagle or one of the mega buck vests on Lightfighter.com.

first off, for around $60.00 to your doorstep, this vest is not to bad, it's even Camelback ready, with a neat interior pocket on the inside of the back panel. It holds 6 AR15 mags and three pistol mags on the front, a accessory pouch with velcro I.D. strip and a second small pouch mounted up on the shoulder (The first thing I'm goung to do is sew wider protective flaps over the mag pockets.)

The back has three rows of attachment points and a extraction loop up by the neck (the extraction loop is going to get a complete re-work, because I would not bet my life on it.)

it has duty or web belt attachment points that fasten with both velcro and a snap on each.

Oh and by the way, when it says in the ASPI blurb, that one size fits all. I think they mean that  one size fits all in Taiwan. If your a guy that has some serious girth (over size 44 or 6'1) this may not be the vest for you.

It has a anti-slip pad on the right shoulder.

two inside, mesh map pockets

No side panels, just three straps down each side (I'm going to have to do something about this.)

Anyway...I hope that answers a few questions, for those of us looking for a vest that comes in well under $75.00.