Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
11/24/2017 4:44:23 PM
11/22/2017 10:05:29 PM
Posted: 9/1/2004 9:00:52 AM EST
[Last Edit: 9/2/2004 9:16:25 AM EST by NSFJojo]
Just got it in yesterday. Won't pump, tried elongating the guide rod, sear won't engage bolt. Spring is of proper size(13), valve spring is in place. Any suggestions besides "send it back"?
Link Posted: 9/1/2004 9:23:23 AM EST
BTT
Link Posted: 9/1/2004 9:25:55 AM EST
You mean, tippmann 68-II, pump paintball gun?

Never got to play with one, love my two 98cs and my A-5.

John
Link Posted: 9/1/2004 9:58:55 AM EST
Yes of course. Sear won't engage bolt no matter how hard i cock it, that's the sum of my problems.
Link Posted: 9/1/2004 10:09:33 AM EST
Someone has to know...

but since I have to wiat, I'll offer you some:

Link Posted: 9/1/2004 10:11:44 AM EST
You need a fat kid to properly test it. Set some bacon (floppy is best) on a rock in the creek and wait in your blind. They can't resist bacon.

Kirk
Link Posted: 9/1/2004 10:13:09 AM EST
Playing with a pump gun in an electronic trigger controlled paintball world...

Hard core!
Link Posted: 9/1/2004 11:11:40 AM EST
lunch crew - i need help BTT
Link Posted: 9/1/2004 11:17:11 AM EST
[Last Edit: 9/1/2004 11:19:25 AM EST by Offspring]
No answer to your pump problem but it is good to see old school paintballers. I still have a couple Splatmasters and a Benjamin Sheridan p-68df. Fun to play with/against the modern guns. One game I had a guy with an angel come up to my bunker with me and ask me to cover him while he bukered someone. I looked at my single shot splatmaster and at him and couldn't help but laugh. Instead he covered me while I bunkered the kid with a gun older than he was.

ETA; Have you contacted Tippmann yet? They might be able to help you out over the phone.
Link Posted: 9/1/2004 11:40:52 AM EST
Tried but their service line is no longer in service and my email has not be replied to.
Link Posted: 9/1/2004 11:43:45 AM EST
okay has it yet been shot?b does it have any paint debris in the gun? is the pump are stiff or lose?
Link Posted: 9/1/2004 12:18:16 PM EST
Gun has been completely stripped, is in perfect condition, oiled and no debris is present. the cocking is smooth, it just won't go all the back and engage the bolt with the sear. I have unscrewed the guide rod and i can rack it to the very rear most with clearance still available on the guide rod to go back further (if it was possible). Valve is in perfect condition, springs are all present.
Link Posted: 9/1/2004 12:19:25 PM EST
dood get a new gun. namely an A5.
Link Posted: 9/1/2004 12:25:22 PM EST

Originally Posted By photokirk:
You need a fat kid to properly test it. Set some bacon (floppy is best) on a rock in the creek and wait in your blind. They can't resist bacon.

Kirk



Poll Needed:
Floppy or Crispy Bacon for Testing Paintball Gun
Link Posted: 9/2/2004 9:16:14 AM EST
fixed it fuckers, love

-jojo
Top Top