Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 8/24/2005 5:59:48 PM EDT
Just curious. Any way to get something like those optics mounted on a 10/22?
Link Posted: 8/24/2005 6:02:24 PM EDT
just get a full sise weaver base and clamp it on
a few companies make um
the weaver one is a TO9
Link Posted: 8/24/2005 6:04:02 PM EDT
Just about any bolt on Weaver or Picatinny rail should work.
Link Posted: 8/24/2005 6:04:21 PM EDT
Mount them on a rail mounted to the top of the receiver.

It should be drilled for the rail.

Link Posted: 8/24/2005 6:04:58 PM EDT
What's been said x3
Link Posted: 8/24/2005 6:22:14 PM EDT
Weaver makes a double width rail just for the 10/22 . It has a little narrow Rimfire rail down the center and the outside edge is the standard weaver rail . It is really just a section of alluminum in the right shape . It comes in black or a silver /stainless finish . It comes drilled to match the standard 10/22 holes and comes with screws. It really beats the cheep little strip mount that comes with the 10/22 but goes on the same way. Carefully mount the screws with loctite and don't crunch them too hard as they only grab a couple of threads (each screw) and the reiciever is soft aluminum . If you strip it you can drill everything (mount and reiciever ) out and go next size screw larger . Last one I bought was a couple years back at the local gunstore and was $8
Top Top