Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
BCM
Durkin Tactical Franklin Armory
User Panel

Arrow Left Previous Page
Page / 2
Posted: 8/19/2017 4:28:54 PM EDT
I'm looking at building a new rifle. I have a few different ideas but keep bouncing around different ways.

I have just sold a basic railed 16.

I was looking at a pistol, or an 18/20 build. Even a dissy.

Will be pinker, HD and ride in the truck.

What's your next rifle?
Link Posted: 8/19/2017 4:39:31 PM EDT
[#1]
I just bought the 'next one' I had been wanting, so I don't have any other rifles planned at the moment.

Handgonne barrels, on the other hand..
Link Posted: 8/19/2017 4:43:27 PM EDT
[#2]
Bcm dickmod upper, other block II rifle is too heavy with all the lasers and lights on it and i dont feel like working out
Link Posted: 8/19/2017 4:43:55 PM EDT
[#3]
18" barreled .308 Semi-Auto, hi-cap mag fed.

Specially for shooting at targets out to 650 yards. Also an IR laser, suppresor compatible and tuned to my 168gr handloads.
Link Posted: 8/19/2017 4:46:38 PM EDT
[#4]
PSA complete A2 lower and complete 20" upper.

Have carry handle and hand guards of my Colt to add to it.
Link Posted: 8/19/2017 4:46:59 PM EDT
[#5]
Bought a lower for $39.00  from a local shop.Thinking 6.5 Grendel.Dont know shit about the caliber, but it sounds interesting.
Link Posted: 8/19/2017 4:51:12 PM EDT
[#6]
Discussion ForumsJump to Quoted PostQuote History
Quoted:
Bought a lower for $39.00  from a local shop.Thinking 6.5 Grendel.Dont know shit about the caliber, but it sounds interesting.
View Quote
Had a Grendel before my 16 and it was a really good shooter, built to be a hunting rifle. Went differently when I missed hunting season
Link Posted: 8/19/2017 4:51:46 PM EDT
[#7]
I keep fighting the temptation to build an M16A2 clone in 6.5 Grendel.  I haven't done it for a couple reasons: my safe is full (mostly AR builds) and I have to drive quite a ways to shoot at ranges greater than 100 or 200 yards.

I've also been resisting the temptation to build an integrally suppressed (one stamp) carbine in .45 ACP (DI45) or 300 blackout.  That would get shot more, but the safe is still full
Link Posted: 8/19/2017 4:54:52 PM EDT
[#8]
Anything less than a Barrett .50 w/ rail mounted RPG launcher is just pissing into the wind.
Link Posted: 8/19/2017 5:00:50 PM EDT
[#9]
Either an original Henry lever-gun or a R. B. Rodda 4 Bore Hammer Double Rifle  with case and accesories .................





Link Posted: 8/19/2017 5:05:03 PM EDT
[#10]
The DTA SRS has been on my list for years. It's mostly irrational... the rifle is a solution for a problem I don't have. But still.
Link Posted: 8/19/2017 5:06:05 PM EDT
[#11]
Link Posted: 8/19/2017 5:10:11 PM EDT
[#12]
A4 varient. Probably a Colt.
Link Posted: 8/19/2017 5:12:09 PM EDT
[#13]
Robinson Arms xcr 6.5 Grendel 18.6" barrel
Link Posted: 8/19/2017 5:13:39 PM EDT
[#14]
have had a form 1 lower approved since 5/18, and my cheap ass is finally getting around to building it out. so 11.5 SBR.
Link Posted: 8/19/2017 5:14:06 PM EDT
[#15]
Pointy end, blunt end, goes pew.
Link Posted: 8/19/2017 5:14:36 PM EDT
[#16]
Bergara b14 hmr. Going by the LGS Monday to get it.

If PSA keeps sending me emails with sub $500 ar10's I'll have one of those also
Link Posted: 8/19/2017 5:15:20 PM EDT
[#17]
Wood stock, likes to eat thumbs.  Hopefully shows up next week according to posts I've seen.
Link Posted: 8/19/2017 5:15:55 PM EDT
[#18]
KAC SR15 Mod 2 M lok 16"
Link Posted: 8/19/2017 5:16:00 PM EDT
[#19]
Form 1 a lower I just got and build a 14.5" M4 SBR. Not a clone, but kind of Block II inspired. 
Link Posted: 8/19/2017 5:19:43 PM EDT
[#20]
Thinking FAL.
Link Posted: 8/19/2017 5:28:46 PM EDT
[#21]
12.5 SBR'd Suppressed 6.8

Starline brass is getting close now
Link Posted: 8/19/2017 5:29:49 PM EDT
[#22]
An AK variant, probably a Yugo underfolder.

Like this N-PAP.

Link Posted: 8/19/2017 5:32:06 PM EDT
[#23]
Barrett Fieldcraft in either .22-250 or 6.5 Creedmoor.


Link Posted: 8/19/2017 5:32:13 PM EDT
[#24]
Beanland Custom

Defiance Deviant Tactical action
Benchmark 1/8 5r Sendero profile 6.5CM
Mcmillan A5
Surgeon DBM
Timney 510
Nightforce ATACR 5-25 Mil-C

I have all the parts at John's shop.  Just waiting...
Link Posted: 8/19/2017 5:36:06 PM EDT
[#25]
I always have a plan to buy a "next rifle" but spare parts keep growing into new builds instead
Link Posted: 8/19/2017 5:41:29 PM EDT
[#26]
M4A1 with a 14.5 p/w A2x flash hinder
Irons only with a removable carry handle
Skinny carbine handguards/heat shields
Modern streamlight mounted to the FSP 

Inspired by this but with a few modern tweaks:
Attachment Attached File
Link Posted: 8/19/2017 5:45:22 PM EDT
[#27]
Probably a small frame (DPMS Gen 2 style) AR-10 with a 20" Proof carbon fiber 6.5 Creedmoor barrel (as soon as they make one for the small-frame platform).

Lightweight components all-around with a Vortex PST Gen II.
Link Posted: 8/19/2017 5:48:05 PM EDT
[#28]
I want a bolt gun again. Probably another Remmy 700, long action this time instead of short action.
Link Posted: 8/19/2017 5:52:56 PM EDT
[#29]
I want an browning x bolt in 308 w a Zeiss terra 4-12. Maybe a nightforce or a vortex razor if I want to get spendy.
Link Posted: 8/19/2017 5:56:35 PM EDT
[#30]
Don't think I will ever be able to buy another one.

Link Posted: 8/19/2017 5:59:30 PM EDT
[#31]
.308 home build with 80% lower. All built just waiting on the upper money. Considering either the ProFab or possibly a PSA but am leaning to the ProFab as I'm not sure of the fitment of the PSA Upper to the DPMS style lower.

Planning on using a Primary Arms ACSS HUD DMR 4-14x44. As such, I'd welcome any input on this scope for an AR in .308
Link Posted: 8/19/2017 6:02:07 PM EDT
[#32]
Bcm 14.5" upper
Kac urx 3 or 3.1 rail
Haven't decided on the muzzle device
Surefire m300c
Aimpoint t-1
Bcm lower with ctr stock
Link Posted: 8/19/2017 6:02:51 PM EDT
[#33]
Since nearly all known FA Industry ditched the 6.8 (I've had mags for over a year) I got a 6.5 Grendel ultimate 18" kit from LaRue a few weeks ago.  Put about 150 rounds so far.  Phenomenal round in the AR15 chassis and a phenomenal product from LaRue for a phenomenal, "your dumb if you pass it up" price.

next will be a 12.5 SBR in 6.5 G.

I drank the cool aid and it tastes friken great.

(I could never understand the idea of a 300 BO other than just a barrel swap.  Wasn't worth it for me)

OP: Wolf is making a 16" 6.5 G upper in standard M4 A3 config.  100 gr wolf ammo goes for about the same price as 223 plinking ammo.  Not bad at all for truck gun that can take hogs, deer, and elk in a pinch.
Link Posted: 8/19/2017 6:11:27 PM EDT
[#34]
Aero American Flag lower/Aero stripped upper
MBT trigger
Toolcraft BCG
UTG Pro 15" rail
MBUS Pro BUIS
either a DD or BCM 16" mid length barrel
Magpul MOE stock & grip
Steiner P4xi in the extra Burris PEPR mount I have(at least for now)
WOTG sling
undecided on light. Might just go with the same Magpul mount with a Mag Lite Mag Tac  that is on my other carbine.

Probably won't get this gun finished until the end of the year. I already have the lower but want to see if I can get the rest of the stuff on sale. Plus I need new tires on my truck and that kills the fun money budget for right now.
Link Posted: 8/19/2017 6:25:36 PM EDT
[#35]
Accurate fighting carbine:

Faxon 16" 5R barrel
Vltor billet upper
Davidson Defense nitrided BCG
Midwest Industries 15" M-Lok lightweight handguard
AAC flash hider
Holosun RDS
PSA forged lower
Geissele SSA trigger
MOE stock
H1 buffer
Ergo grip
Magpul single point sling
Link Posted: 8/19/2017 6:28:58 PM EDT
[#36]
This, if the rumor of a commercial release is true:



Hopefully the rail mount format changes to MLok.
Link Posted: 8/19/2017 6:39:56 PM EDT
[#37]
I've had a Mauser action lying around for years.
Thinking about maybe the Rhineland Arms .45acp conversion.
Link Posted: 8/19/2017 6:55:23 PM EDT
[#38]
Desert Tech MDR.
Link Posted: 8/19/2017 6:56:34 PM EDT
[#39]
The plan is to do something similar to this.


Attachment Attached File
Link Posted: 8/19/2017 6:59:17 PM EDT
[#40]
A Larue $99 kit is very tempting. An 18" Stealth barrel would be the cat's ass.
Link Posted: 8/19/2017 7:37:26 PM EDT
[#41]
I'm going to swap out the upper receiver and rail on one of my SBRs then I just need a 300 blackout barrel to assemble a 9" pistol from my spare parts drawer. My next complete rifle will be a muzzleloader so I can get in on some white tail a little earlier this year.
Link Posted: 8/19/2017 7:43:41 PM EDT
[#42]
Rifle:
Interested in Pistol Caliber Carbine for Steel Matches, so I am looking for a Beretta CX4 Storm.

Shotgun:
Shot a round of trap at a company picnic, reignited the interest.  Looking for a Beretta A300.

Pistol:
GSSF Coupon burning a hole in my pocket, G26 Gen4.
Link Posted: 8/19/2017 7:44:09 PM EDT
[#43]
I've still got a few spare lowers. Probably a pistol. More than likely it'll be a 6.5 Creedmore bolt gun.
Link Posted: 8/19/2017 7:46:05 PM EDT
[#44]
Probably a 9mm AR. One of the calibers I haven't done yet. Currently I have ARs in the following calibers.

22
5.56 x 10?
5.7
6.5 Creedmoor x 2
6.8 SPC II x 2
7.62x39
.300 blackout
.308

I've pretty well filled my AR thirst at this point. Still need a pre 86 transferrable though.
Link Posted: 8/19/2017 7:50:25 PM EDT
[#45]
Either a used marlin 336 in 30-30 or a Ruger American ranch rifle in 5.56, I have had a want for a 5.56 boltgun for awhile.
Link Posted: 8/19/2017 7:51:55 PM EDT
[#46]
I need either an A2 with 20 inch barrel or just save my coins and buy an HK AR................even though they hate me
Link Posted: 8/19/2017 7:52:27 PM EDT
[#47]
I want a white recce style rifle with black accents.

UBR, 16" barrel, 15" rail.

Receivers, rail, stock all painted bright white. Small parts on the UBR, LPK, muzzle device, scope left black.
Link Posted: 8/19/2017 7:52:36 PM EDT
[#48]
Bren 805. I haven't decided if i want pistol (and SBR) or rifle.

Second choice is SCAR16.
Link Posted: 8/19/2017 7:53:49 PM EDT
[#49]
I'm putting an older XM15 back into service-it was down to a stripped lower
Link Posted: 8/19/2017 7:55:21 PM EDT
[#50]
dunno, i am prone to impulse buys and chasing sales
Arrow Left Previous Page
Page / 2
Close Join Our Mail List to Stay Up To Date! Win a FREE Membership!

Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!

You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.


By signing up you agree to our User Agreement. *Must have a registered ARFCOM account to win.
Top Top