User Panel
Posted: 4/12/2017 11:00:11 AM EDT
Just posted with either wood or synthetic handguards. They look pretty good.
Link incoming |
|
|
|
|
|
|
So where would you get a barrell and receiver, and how hard is it to piece together?
Does it require a gunsmith? |
|
CNC warrior was making receivers awhile back. check the fall subforum under the Ak47 than at the top. Or go to their website.
https://www.cncwarrior.com/Receivers-s/1517.htm |
|
|
|
|
First video is a ARM which is close to the AR model
Galil ARM Full Auto SAR Jeremy''s 1st Full Auto Experience |
|
|
Quoted:
Is the barrel plugged? It shows one in the pic - or are they just shot out? https://www.gunpartscorp.com/pub/ProductImage/1591850.jpg View Quote |
|
Who makes the "how to video" on milling out the 80% receiver?
Does one just call green mountain to have a barrel made because I am not seeing them on their website. |
|
Quoted:
Is the barrel plugged? It shows one in the pic - or are they just shot out? https://www.gunpartscorp.com/pub/ProductImage/1591850.jpg View Quote |
|
|
I would be curious what it takes to make one full auto - We have a few more to build before we hit the limit for the year (49)
|
|
Quoted:
Who makes the "how to video" on milling out the 80% receiver? Does one just call green mountain to have a barrel made because I am not seeing them on their website. View Quote |
|
|
|
|
|
Quoted:
https://tortort.com/products/80-galil This one was done with an etching kit. http://i1286.photobucket.com/albums/a607/X-ray6/DSCN3848_zpsj1csjbqx.jpg http://i1286.photobucket.com/albums/a607/X-ray6/DSCN3849_zpsyslptqz7.jpg http://i1286.photobucket.com/albums/a607/X-ray6/DSCN3851_zpsxjkkqezo.jpg View Quote Then I saw $325 for an 80% receiver and said NO DEAL. Still want a galil at some point though |
|
|
Quoted:
Bush 2 . No one has reversed the 2005 barrel ban. View Quote View All Quotes View All Quotes |
|
|
|
Quoted:
Quoted:
I would be curious what it takes to make one full auto - We have a few more to build before we hit the limit for the year (49) View Quote View Quote |
|
|
Quoted:
So if This Receiver ever comes back in stock I can finish the job? If I don't go with an 80%. View Quote |
|
Quoted:
It takes them forever to do another run. View Quote View All Quotes View All Quotes Quoted:
Quoted:
So if This Receiver ever comes back in stock I can finish the job? If I don't go with an 80%. |
|
|
Quoted:
I thought this thread was going to cost me $ Then I saw $325 for an 80% receiver and said NO DEAL. Still want a galil at some point though View Quote So at this point you're getting into FAL territory On the plus side they are stupid easy builds, no rivets except for the trigger guard (which can use screws if you need) and the barrel is threaded. |
|
Quoted:
CNC Warrior complete receivers are also nearly $600+ So at this point you're getting into FAL territory On the plus side they are stupid easy builds, no rivets except for the trigger guard (which can use screws if you need) and the barrel is threaded. View Quote View All Quotes View All Quotes Quoted:
Quoted:
I thought this thread was going to cost me $ Then I saw $325 for an 80% receiver and said NO DEAL. Still want a galil at some point though So at this point you're getting into FAL territory On the plus side they are stupid easy builds, no rivets except for the trigger guard (which can use screws if you need) and the barrel is threaded. |
|
|
|
Quoted:
Whats the word on these guys: http://assaultweaponsofohio.net/products/ $259 complete receivers. View Quote |
|
|
|
Quoted:
18.00 mags vs 75 to 100.00 a mag for one. View Quote View All Quotes View All Quotes |
|
So tempted, but I'd be in over my head and would have to have it built.
|
|
Damn I really don't need another parts kit/build but I want a Galil
|
|
Crap...Should I use this kit on my Norinco hunter...decisions decisions...
|
|
Quoted:
https://tortort.com/products/80-galil This one was done with an etching kit. http://i1286.photobucket.com/albums/a607/X-ray6/DSCN3848_zpsj1csjbqx.jpg http://i1286.photobucket.com/albums/a607/X-ray6/DSCN3849_zpsyslptqz7.jpg http://i1286.photobucket.com/albums/a607/X-ray6/DSCN3851_zpsxjkkqezo.jpg View Quote Everything fits on the receiver and the bolt slides and rotates great. Tortort did a nice job. The receiver came out great - used the scraps from the demil receiver as a template, childers guide and Tortort's diagram to locate holes. I did the thumb selector slot with a dremel cut off wheel. I Recommend good quality cobalt drill bits and you won't have any problem drilling through the steel - its 42RC. |
|
Sign up for the ARFCOM weekly newsletter and be entered to win a free ARFCOM membership. One new winner* is announced every week!
You will receive an email every Friday morning featuring the latest chatter from the hottest topics, breaking news surrounding legislation, as well as exclusive deals only available to ARFCOM email subscribers.
AR15.COM is the world's largest firearm community and is a gathering place for firearm enthusiasts of all types.
From hunters and military members, to competition shooters and general firearm enthusiasts, we welcome anyone who values and respects the way of the firearm.
Subscribe to our monthly Newsletter to receive firearm news, product discounts from your favorite Industry Partners, and more.
Copyright © 1996-2024 AR15.COM LLC. All Rights Reserved.
Any use of this content without express written consent is prohibited.
AR15.Com reserves the right to overwrite or replace any affiliate, commercial, or monetizable links, posted by users, with our own.