Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Posted: 10/19/2004 1:34:35 PM EST
I know some of you guys have already mentioned that you owned Benelli M1 Tactical shotguns, so if you can help, I would appreciate it. All I need to know is:

What in the hell is the trigger group pin supposed to look like? Is it supposed to remove from either side of the receiver?

The reason why I ask is because the gun I bought came with an Aimtech Weaver rail mounted on the receiver, and a hex-head bolt replaces the stock trigger group pin and threads into the opposite side of the Aimtech mount. I have removed the Aimtech, and want to replace the hex-head bolt with the original pin. Thanks in advance for the help!
Link Posted: 10/19/2004 2:26:29 PM EST
Oh yeah, what would you recommend for accessories for a Benelli M1 Tactical ? What would be a good sling to use?
Link Posted: 10/19/2004 2:43:28 PM EST
www.e-gunparts.com/products.asp?chrMasterModel=4150zM1%20SUPER%2090%20FIELD&MC=


I am sure you can find them for cheaper. If they are legal in your state.

www.e-gunparts.com/product.asp?chrProductSKU=742380A&MC= and one of these of course.

Link Posted: 10/19/2004 3:03:26 PM EST
Thank you for the leads! I definitely want to get the 4 round mag extension.
Link Posted: 10/19/2004 3:58:37 PM EST
[Last Edit: 10/19/2004 3:59:19 PM EST by Phil_in_Seattle]
www.brownells.com

part # 301-000-028
Trigger Guard Retaining Pin
$6.74

Order 2 of them because at some point you'll try a sidesaddle and you'll lose the first one by forgetting where you stored it at, and you won't have it when you take the sidesaddle off.



It's #151 on this diagram
Top Top