Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
9/22/2017 12:11:25 AM
Posted: 8/17/2005 4:17:10 AM EDT
Hello,

Since I can't get the real ones and the 37mm flare launchers just don't look like the real deal I decided to go for airsoft. I'm planning to buy G&P M203 launcher



Will it fit without any tinkering my 20" Gov't barrel??? Can I use Gov't M203 handguards or do I have to buy the G&P ones?

Anyone have any pics of their setups????

Thanks!!!
Petri

<­a class='textLink' href='http://www.uncompany.com/images/g&p-launcher-military-long_big.jpg' target='_new'>www.uncompany.com/images/g&p-launcher-military-long_big.jpg
Link Posted: 8/17/2005 4:22:15 AM EDT
Link Posted: 8/17/2005 4:22:33 AM EDT
this has potential
Link Posted: 8/17/2005 4:24:31 AM EDT
Link Posted: 8/17/2005 4:25:15 AM EDT

Originally Posted By NoVaGator:
this has potential


Not quite the word I'd use.
Link Posted: 8/17/2005 4:26:27 AM EDT
Link Posted: 8/17/2005 4:26:33 AM EDT
He HE HE! This SHOULD be good
Link Posted: 8/17/2005 4:30:20 AM EDT
Link Posted: 8/17/2005 4:30:32 AM EDT
Airsoft thread in the open.

Fire for effect!
Link Posted: 8/17/2005 4:31:01 AM EDT
[Last Edit: 8/17/2005 4:32:10 AM EDT by TheFlyingFinn]
Come on, guys!!!

BTW, does AR15 have an airsoft forum??
Link Posted: 8/17/2005 4:31:46 AM EDT
[Last Edit: 8/17/2005 4:32:14 AM EDT by Phil_A_Steen]
I love this one:

Link Posted: 8/17/2005 4:50:43 AM EDT
Euro
Link Posted: 8/17/2005 11:53:56 AM EDT
btt for more input
Link Posted: 8/17/2005 11:55:17 AM EDT

Originally Posted By The_Beer_Slayer:
popcorn.... check

riot gear..... check

let the GAMES BEGIN!!!!





I feel like I shouldn't post pics because it's in the right forum.

Link Posted: 8/18/2005 3:28:46 PM EDT
Yes it will fit. Most Tokyo Marui, CA an G&P Armalites are built very similar to their real conterparts. The TM guns usually need a new "one piece barrel" to use a non RIS M203. But since your AR doesn't have that problem any M203 should work.

I have seen custom built TM M4s with more real AR15 external parts on them than airsoft versions of the same part.

An airsoft RIS rail will also fit a real AR15. So if you decide to change forends you can simply change to a M203 RIS version.

Look around Ebay, you might find someone selling just the launcher and you can save $50. Since the shells are pretty finicky you'll probably be happier just using a dummy M203 shells if you want something to load and unload for fun.

But if you do want to use the shells you can get help at a lot of different sites. If you want some links just ask.
Link Posted: 8/18/2005 5:46:41 PM EDT
Did he just... no, no, I must be mistaken, I'm just going to close this thread, and never come back.

I didn't see anything.
Link Posted: 8/19/2005 12:29:29 AM EDT
ErinMT

Thanks a ton, mate!!!! Any idea if the real M203 handguard work with the launcher or not?
Link Posted: 8/19/2005 12:34:40 AM EDT
omg airsofters destroying real guns omfg... WHY DO YOU NEED A M203 NUMBNUTS
Link Posted: 8/19/2005 4:56:04 AM EDT
the 37mm flare launcher is going to look better than some airsoft POS on a real gun
Link Posted: 8/19/2005 10:13:06 AM EDT

Originally Posted By sharky30:
the 37mm flare launcher is going to look better than some airsoft POS on a real gun



And it might actually be useful for something.
Link Posted: 8/19/2005 1:37:08 PM EDT
Don't know about the handguard, sorry. Never needed to replace one. They were always more than durable enough to stand up to whatever could be thrown at them.

And none of the guys I run with that used and still use real M203s have ever complained about them being too weak compaired to the real thing.


Link Posted: 8/26/2005 8:13:33 AM EDT
Actually, if you're just going for the look - which I assume that you are - you'd probably be better off using the 1:1 replica of the M203 that DPMS makes. It uses a solid receiver and the barrel has no rifling. It does open and close and has the M203 grip. It can attach to a 20" or a carbine and comes with non-marring spacers if you want to attach it to a thin barrel. I have two of them, and here's one of my AR15's with one on:




If you're interested in my other one, I'd sell it for $200. It has the full length handguard, and leaf sight. If you're interested, I even have the carry handle sight I'd add in for another $25.
Link Posted: 9/12/2005 12:51:00 PM EDT
jtb33,

Thanks a ton, mate!!! I'll probably order one of those!!!
Link Posted: 9/12/2005 1:11:29 PM EDT
So, it'll be the LESS LETHAL option on your use of force continuum?
Link Posted: 10/6/2005 5:09:22 PM EDT

Originally Posted By Inspector1:
WHY DO YOU NEED A M203 NUMBNUTS



I know I didn't just read a post HERE asking why you would *NEED* somekind of toy
Top Top