I have a 14/1 left handed 7.62 threading kit from dyna-systems/precise innovations
, I want to trade its use, i.e., rent
for (1) used USGI (Colt, etc..) 20-round AR15 magazine in GOOD operating condition or (1)NIW or (2)used in good condition USGI 30-round magazines. I will email you a tracking# from UPS when I ship to you.
Here is what I'm looking for in a magazine:
No cracked/bent feed lips
No rust on spring or steel insert on inside of mag
Floorplate/floorplate tabs in good shape
No dents or dings or major scratches
Original aluminum follower Finish % /lack of finish is not important...function is.
I plan on refinishing them, so a worn finish is OK. --OR-- One new in wrap/new USGI teflon finish 30-round magazine, or two(2) used in good condition USGI teflon finish 30-round magazines.
I will include the threading kit (14/1 LH metric die, 7.62mm thread alignment tool and die wrench), cutting oil, cold blue(to touch up the threads) and complete instruction sheet! Everything you need to thread your 7.62 AK! It is EASY! I have used it on my own SLR95.
Read the instruction sheet here. NOTE:Be advised that the barrel outside diameter must be at least .551"/14mm at the muzzle to thread your barrel.
Some AK variants such as the WASR have a turned down barrel that are too thin to thread with this kit. NOTE
:.You must already have a 14/1 LH muzzle device in order to use the kit properly. When you ship it back to me please include an email w/ a UPS tracking#. Use UPS only.
The USPS can't pour piss out of a boot with instructions on the heel.