I have everything someone with more time then myself needs to build a semi Yugo M56 for trade. It contains the following components(pics at the end):- 1 Excellent condition Yugo M56 Kit:
Gun has been partially demilled, and bolt has been professionally convereted to semi by Tommerr of www.weaponeer.net. Bolt comes with 1 custom firing pin, and 2 custom firing pin return springs. 35 round magazine will not be shipped to where its not legal. - 1 Yugo M56 80% receiver by Prexis/Sten:
This is the reduced ID semi only version. I started to cut out the ejector port, but never finished.-1 new Bushmaster trigger group(not pictured):
Supposed to be used for the semi conversion, never got that far
- 800 rounds Polish (I think) 7.62x25 subgun ammo(not pictured) Packed in 40 round boxes on 8 round strippers SPF
My costs into this are as follows:
Excellent grade Kit............... $125
Bolt work............................... $90
Reduced ID 80% reciever... $140
Bushy trigger group.............. $50
Ammo.................................... $70 SPFTotal $475 405
Im looking to get about $
worth of something cool out of this. I'm not looking to get anything in particular, so let me know what you've got.
I also have a Chinese back loading 75 round Drum, marked triangle 36. I had an issue with it in my Norinco that I corrected - the center support pin in the AK was turned flat side up drum would not clear the pin. I have inserted the drum to test fit in 2 other AKs, and while it was tight, it fit. I picked it up in trade, and I have never fired a round through this drum, and the previous owner told me he had never fired a round through it. I'de like to get about $140 shipped out of it.
If you want to bargain about the prices, let me know, I'm fairly flexible.
Reciever where I started to cut
Front of bolt, showing semi - firing pin conversion
Back of bolt, showing semi firing pin rear and hammer slot
Drum back with arsenal mark