Hi. Up for sale is my pre-ban AA Arms/Kimel AP-9 (9mm). I purchased this off another board member last fall. Previous owner claimed to have only put 100 rounds though it, but that doesn’t matter much cause I put another 2,600 rounds though it…then accidentally cracked the plastic lower while cleaning it a few weeks ago . One of my American Bulldogs decided to try and knock me out of my chair (playing around of course) right when I was removing the upper from the lower to clean it one evening…and the lower cracked cause I didn’t have the nipple out of the hole before the dog hit me and the leverage from the blow to my arm holding the upper cracked the plastic lower. That was at the 2,400 round mark. I then rigged it (don’t laugh too hard, LOL) with super glue. It held for about 200 rounds then came apart again. It’s at the point now where it needs someone who actually has some plastic epoxy skill to fix it before it cracks all the way through. It’s close now and needs fixed the right way (IMO) before being shot again. I took a bunch of pics, but they came out like crap cause I was holding the camera with one hand and lower in the other, but hopefully you can see the crack. If not, I can attempt to take better pics, but those were the better pics I had out of about 10. I also need to mention that this gun does jam a few times per mag (like many do, usually a FTExtract) and the follower on one of the 28-30 round mags is cracked on the bottom edge (it was like that when I received it). Doesn’t seem to affect function though, it doesn’t jam anymore then the other ones do, LOL.
Ok, now that I’ve been totally honest about the gun, here’s what you get:
1. Kimel AP-9
2. Original 20 rd. mag…+ 20rds of WWB 115 FMJ 9mm.
3. 2x - 28 or 30 rd. mags. I’m not even sure of their max capacity. I never loaded more then 20 and 25 rounds at a time so I could easily keep track of how many rounds I put through it.
4. Original Box with pre-ban tag/sticker on it and original instructions.
5. Kolpin case – This is actually for paintball guns, but it worked out perfectly for this gun. The front has a few tall/long zipper pockets that work perfect for storing longer 30 rd. mags and the inside can be customized to fit most pistols.
Take it all for $250 cash or I’ll consider trades for:
PMAGs (new, black, Gen II only)
D&H Black Teflon mags (new only, 20 or 30 rd. )
Beta Mag (new only, black with clear back, for .223/5.56 AR15)
AK rifle 7.62 or 5.45 (I'll add cash.)
EOTech 511 or 551
5.56mm/M855 – 720-1k rounds depending on what you have
.22lr – CCI Stinger 3k-3,500 rounds
.45 acp – Golden Saber BONDED or Federal HST.
…I’ll add more stuff if I think of anything.
This transaction has to be FTF here in Washington, PA (which is about 25 miles south of Pittsburgh). We can meet at Ace Sporting Goods and complete the transaction there (…where they will run the NICS background check and transfer the weapon into your name).
Feel free to email me with any questions or offers you may have. You can email me at: firstname.lastname@example.org
Also, I know I don’t have many posts on this forum, but I do have one positive feedback here and I also have over 400 unique positive feedbacks on eBay. My eBay feedback can be seen here… eBay Feedback
Well, if you made it this far, then I thank you for taking the time to read everything and for considering this pistol. I look forward to doing business with one of you. Later.
Pictures:http://www.intriguingreptiles.com/Ghetto%20Blaster%20Package.jpg http://www.intriguingreptiles.com/Ghetto%20Blaster%20Closeup.jpg http://www.intriguingreptiles.com/Ghetto%20Blaster%20Otherside.jpg http://www.intriguingreptiles.com/Ghetto%20Blaster%20CrackedLower.jpghttp://www.intriguingreptiles.com/Ghetto%20Blaster%20CrackedLowerSideView.jpg http://www.intriguingreptiles.com/Ghetto%20Blaster%20feedramp.jpg http://www.intriguingreptiles.com/Ghetto%20Blaster%20Case.jpg
ETA: FTF in PA only and Pictures to subject line.