There being marked on the bottom front, sorry no custom serials, its too time intense. Here is a pic and also updated site with a pic. Price does not include shipping, non folder recs will be the same price also.
DCI receiver compared to the receiver we are selling. Please note this is in no way a slam on the DCI receiver.
DCI uptop, ours on bottom, notice the mag well dimples, much more "clean" on ours.
Again, DCI uptop, DCI has no selector dent, also has SF. Ours no SF, get engraved what you like when you get it, and ours has the selector dent.
DCI on bottom now. DCI dent for the front tang, no well pronounced. DCI sticks with the Yugo rivet on PG nut, ours you can go either way if your working with a non Yugo kit or mixing and matching up a gun. DCI has over ours the two holes for the underfolding stock pins to come out the bottom, you can easily drill them in if you want them on ours.
DCI on right now. DCI ejector only long enough for 762, ours long enough for 762 or 223. DCI rails installed alittle, just a hair too far forward (atleast on the one I built) and the trunion stuck past the receiver. DCI center support in a hair too far forward also if your looking to use on a 223 and extend the ejector, magazine hits it and will not insert.