This is a like new condition ATN 440 Gen 2 weapon sight. It uses the same Gen two 25mm image tube as used in the military issue AN/PVS-4 and AN/TVS-5 weapon sights. I have played with it for a couple hours but I have never mounted it on a weapon. It includes the built in weapon mount that attaches to any weaver or picatinny rail, 100 meter IR illuminator for use in complete darkness, remote control unit still sealed in plastic(not needed for operation), a MILSPEC hard case, all the paperwork in the plastic sleeve, and two adjustment tools.
As can be seen in the 4th pic there is a small crack in the right latch on the storage case. However both latches work fine and it could be easily repaired with epoxy.
Please click or cut and paste the photo links below.The night photos were taken in a wooded park on a clear night, no moon, star light only with the long range IR illuminator OFF unless otherwise noted. There were a few street lights and porch lights 250-350 yards away. The range finder below the reticle represents a 2 meter high target at the designated range. As to be expected the night images are degraded by the photographic process.
Pic #1: Reticle on 15 ft trees about 200 yards distance
Pic #2: Nissan Pathfinder about 100 yards away.
Pic #3: Nissan Pathfinder about 100 yds away illuminated with the built in IR
Total darkness tech.: Standard
"Smart" tech.: Standard
Intensifier tube: 2nd Gen, 25mm S25,MCP
Detection range: 500m
Recognition range: 200m
Lens system: 6 element,F1.6,110 mm
FOV: 14 deg.
Diopter adjustment: +/- 5
Resolution: 36 lp/mm
Power supply: Two 3 volt lithium
Range of focus: 6' to infinity
Reticle: Chevron or range finder
Controls: Direct or remote control
Battery life: 10-20 hours
Dimensions: 300 x 110 x 85 mm
Weight: 2.0 kg./4.4/lb
Price $599 + $16 shipping within the continental USA.
No trades please. Payment via certified funds or Paypal to email@example.com