The barrel is a Rainier Arms Select stainless steel .308 18" with a DPMS receiver extension. Twist is 1x11. The gas system is mid-length. I put approximately 200 rounds through the barrel before stripping the rifle down to parts. The bore is in good shape. The outside of the barrel is in good shape with some cosmetic blemishes. The is a small amount of corrosion on the outside of the barrel near the receiver extension and the finish is blemished near the gas port on the bottom of the barrel from installing and removing the gas block.
The BCG was on the same rifle as the barrel and the headspace for this bolt and barrel was checked when the rifle was built. The carrier has serrations for a forward assist. There is a little wear on the carrier in the normal spots. The finish on the bolt is rough, but it didn't have any effect on function.
I'm asking $200
$180 for the barrel and $110 for the BCG
(sold) shipped or $300 shipped for both. Shipping inside the continental US only. I'm not looking for any trades. Payment via USPS money order. IM me through the forum for the quickest response to any questions.