I have a (UPDATED) list of parts I need to move. What’s still listed needs to go. Stock up.
Thanks for looking
All parts are for the Beretta Model 92-96F/FS unless stated otherwise.
Prices include shipping.
Brownells Performance pack. Opened missing all but the hammer spring and the firing pin spring. These are manufactured by Wolff. Yours for $5
“Hammer Spring. 17lb. reduced power. 92 series 9mm” $4.50
“Firing Pin Spring. Extra Power. Beretta 92 series 9mm FULL SIZE.” $4
“trigger conversion unit” One standard pressure spring. $15
Misc Factory Parts.
4 Special bushings for D model In factory bag. Go where the decoking arm goes in the FS model. $1 each.
2 Trigger Bars. Black. Both are used with good finish,, with what looks to be polish work done where it goes into the trigger. $14 each.
2 Sears. Used but they only have finish wear on the tips where the hammer catches. $10 each.
2 Hammer release lever/de-cocker. (Birds Head) Like New. $6 each (Not the safety lever)
1 Rear drift sight. Chrome or coated silver, would need refinished.. $1 Needs to go, if you need it, $1 will do for it shipped.
3 firing pin catch levers. $3 each
3 takedown levers. One smooth. Black. All have excellent finish. $6 each
2 takedown lever buttons. All have excellent finish. $2 each
2 Hammer pins Large head FS style. $2 each
1 9mm ejector. Great finish. Slight use. $5
1 locking block plunger. Used but only minor finish wear. $2
1 slide stop. BRIG Compatible Used but minor finish wear. $10
1 slide stop. BRIG compatible, NEW $16
2 metal Hammer spring/strut cap. 1 would work great for a polished project. $5 The other has about 30% of the visible finish chipped off, but it’s a good piece. $8
2 plastic Hammer spring/strut cap. Both look New. $4 Each
2 Standard Hammers. Used but in Excellent shape. $10 each
4 hammer struts. 3 look to be new/slight use or take offs. The other just has some finish wear. $3 each
Grip Screw set. Not very good finish. Its there but its used. $3
2 Trigger pins $2 each
1 black extractor pin new condition. $2
2 black tapered pins (both ends are bigger than the middle) fairly long pin, I think this is the solid pin for the strut cap, instead of the roll pin type. $3 each.
1 sear pin. Has finish wear. $2
1 ejector drift pin $1
1 ejector/firing pin arm/decocker arm pin (not the drift pin, the machined one) $2
1 large Hammer strut end cap drift pin $1
1 firing pin catch. Has been chromed or coated silver. doesn’t look pretty but good piece. $2
2 magazine release buttons, all are missing spring and center piece. 1 plastic New, $4. And 1 metal that I believe was an extended one, or had an extended piece on it, it looks Excellent besides the threaded hole where the extended part was. $8
Factory Beretta 84f/FS Left Safety Lever. New in bag. Not sure what its worth. ???
AR .223 A2 flash hider "Birdcage" $7 +$2 for a new crush washer.
1911 magazine spring 7rd $3
All items include shipping.
If your interested in a part post and IM me.
If you think my prices are high just say something, we can most likely work something out.
I really need to move these parts. With school bills (and now that im out of work for a few weeks) I don’t have much free cash to do gun stuff with and I don’t need all these. Some I might decide to keep but for now there up for grabs.
Will take trades, mags (looking for some of those $8 ones), mag parts, skeletonized hammer, wood grips…..
Thanks for looking.
UPDATED LIST Whats listed must go now that im out of work.