This is a brand new VM side charging upper receiver. It has been drilled for the installation of an Oly pistol caliber ejector. It has a flaw in that one of the holes was drilled off center. It has been repaired using a wedge, super glued in the hole to hold the ejector cross pin.
It does not come with a shell deflector or port door. Use it as is or take out the Oly ejector, JB Weld the holes and use it for a 5.56 upper. New ones run well over $200 if you can find them.
This uses a standard BCG but a notch must be cut into the front of the bolt carrier for the handle to push against when charging.
Lowered Price, $100 shipped.
Close up of the repair with the wedge.