TNVC is proud to once again partner with Steiner eOptics to bring an highly anticipated, affordable, feature rich, next generation Class 1 IR laser aiming module (LAM) to the market! The Steiner/TNVC TOR-MINI IR VPC (Variable Power Control) is manufactured by Steiner eOptics, and sold exclusively through TNVC.

Once considered niche products with little use outside of military and law enforcement, night vision and thermal technologies are now embraced by the hunting and civilian enthusiast communities. Many users have come to realize that under certain circumstances, Class 0.7mW IR cause excessive blooming and laser splash at close ranges and with small game, degrading accuracy and precision and obscuring targets.

While most LAMs on the market rely on neutral density filters and/or active supplementary IR illumination to mitigate blooming effects, the Steiner/TNVC TOR-MINI IR VPC features a variable power aiming laser that can be switched between 0.2mW, 0.4mW, and 0.7mW by holding down the onboard “FIRE” button, providing an easy-to-use human interface to switch between output levels to match any target size or environmental conditions. The TOR-MINI IR VPC gives the user total control to adjust IR aiming laser output on the fly to place precision fires on targets large and small, from bad breath distance to over 270 yards, whatever the lighting conditions.

As its name implies, the Steiner/TNVC TOR-MINI IR VPC is small and lightweight, weighing in at only 1.6 ounces, yet built to last with a Type III Hardcoat Anodized, machined aerospace aluminum housing. The TOR-MINI IR VPC is also dust and splash-proof to IP54 standards, and features an adjustable Picatinny rail interface to fit a wide range of pistol and long-gun rails. The TOR-MINI IR VPC’s small mounting footprint makes it ideal for mounting on pistols and short-barreled rifles with limited rail space, and is equally at home on a .22lr varmint pistol to a large frame hog hunting rifle, or even mounted to a thermal weapon sight to allow spotters to detect game and point out targets to hunting partners using night vision devices.

The TOR-MINI IR VPC is not only small, lightweight, durable, and capable, but also extremely affordable, proving that not everything to do with night vision needs to be expensive. The TOR-MINI IR VPC is manufactured in the USA and backed by Steiner eOptics’ 3 Year Warranty, and is one of the best values for such a versatile product on the night vision market!

This Item is ITAR controlled and cannot be shipped or carried outside the United States without express written permission from the United States Department of State. We do not export outside the United States. PERIOD!






As we mentioned, the best feature of this unit has that no other C1 system does is variable power to rid the dreaded bloom based on your environmental conditions. Some examples below.

Using IR illumination?  No problem switch to .7mW with no IR dot wash out from the IR Lum.  Not using any IR Lum and your target dot is washing out a portion of the target? No problem, switch to .2mW or .4mW to clearly see your target!

Pics below taken with a TNV-14 L3 Thin Filmed. Of course pics do not come close to what you the user will see with the quality of real life image.

.2mW


.4mW


.7mW


Special Introductory Pre-Order pricing with Coupon Code "TNVCTORIR" valid until May 15, 2020 can be used HERE

I am a poor and just got a pvs7. I have no IR aiming laser. Is this a cost effective way to dip my toe in the water?

VERY much so for the money along with being Made in the USA!  PM if you have any questions be glad to assist.

When are they expected to ship?

Any eta on availability?

Bout a 2 week or less back order right now, but may be less as full rate production is ramping up. Thank you.

I ordered at the very end of the recent pre-order sale and just got tracking. That was not bad at all, looking forward to checking it out!

im going to buy one, but your answer will determine if i buy two

fits on a 1913 rail check, but can i put it on my glock 19 gen 5?

Sorry, just saw this. I will check.

Yes, it will fit.  We have the adjustability in the mount.

I tried to put the coupon code in, and it appears to not be working anymore? Has that expired?

PM sent

Could I get the coupon code as well? I see that’s it’s on back order, but going to order anyway. Thanks.

I have a DPMS Oracle with a Magpul MOE handguard.

If I get one, will this operate on the railed gas block or should I put it on the receiver?

Also thinking of maybe an extension on the railed gas block to act as a heat sink and pull it away from the block some.

Thanks

Silly question, im sure, but its not explicitly stated here or on tnvc.com...

It this unit windage and elevation adjustable?

Thx!
JP

@TNVC

Yes Sir, both windage and elevation adj.

Railed gas block should be fine. Thank you.

Can I get a coupon code? I wanting to buy another one.
@TNVC
Thanks

Sam

When will these be back in stock?!? Any codes available? Thanks!!

I have 2 sitting in my cart waiting to check out.

These are on backorder now, but hopefully ship fast like some of my previous backorder stuff.

Are there any coupons available?

I thought i ordered some in May , but I just got a bunch of helmet lights, I guess I never put these in the cart.

any coupons?

looking to buy a few of these.

We have FINALLY have some substantial stock as we are now in full rate production with Steiner!  These units are getting very popular for a reason.  Thank you for all the orders!

Order placed

Thank you!

Got any of those 2020 coupon codes sitting around?

Got mine the other day.  Fits nicely on the front of a 10.5" AR upper.  Dot is very visible in my Elbit NODs.   Very much like the easy power adjustment!