I finally got this back from Iraq.
Sage stock complete (all rails, handguard, clipslot rail, all parts including handguard cap replacement/shim) with:
Sniper Tools Inc Angle cosine indicator
US Optics bubble level (mounted above the pistol grip)
custom rear sling mount w/Uncle mikes mil spec style QD swivel
KAC RAS mount front swivel base with QD swivel
custom low ready shooting sling [1.5-13/4 length Turner saddlery All weather sling]
Harris bi-pod with ARMS throwlever mount
Includes all tools needed to install the stock minus readilly availible allen wrenches:
ball peen hammer
non marring hammer
flash hider nut pliers (X2)
Gas cylinder wrench
3/8ths cresent/hex wrench
National match op rod spring guide
Buffertech buffer (not pictured)< this is primarily recoil reduction/alteration
gas cylinder shim setWith a decent barrel, Sage stock, NM trigger, shimmed gas cylinder and NM spring guide, a rack grade M14 is capable of 1MOA or better. Mine was shooting 1/2MOA at 95yards firing from prone with 175grain M118LR
Brownells gas cylinder drill set (two drills with screwdriver handles to clean gas system parts)
The other tools in the tools section are also neccessary maintenence tools (gas cylider wrench, gas cylinder nut wrench, and to a much lesser extent the FH pliers).$1000 shipped UPS insured.Pictures should be up tomorrow- they are uploading.
Sniper TOOLS ACI
USO folding RAS mount bubble level
The sling is a tactical/shooting sling combination [photo to illustrate sling taken in mirror IT IS RIGHT HAND- NOT LEFT as it appears in the mirror image
Custom rear sling mount
The sling is a little wrinkled from shipping for six months but that should come out in short order.
The scope is also availible, but damaged - serviceable but the windage knob cover has broken off and it needs a repair at USO I'ld sell it for $1800 not knowing what they would charge- I paid $2550 for the scope and rings and that was with the gov't discount. it's a 3.2-17 3/4 mil dot, 44mm ajustable obj, 175M118LR cam, erek windage, illuminated, 35mm main tube and rings (rings tall enough to clear the top rail on the Sage stock) I have the honeycomb sunshade for it as well. it is optically perfect.