I built this rifle using the following parts and ALL parts were new except the barrel:
UPPER/LOWER are "MEGA" marked
RRA bolt/carrier group
RRA lower parts kit (non 2 stage trigger)
RRA charging handle
RRA upper parts (fwd asst/port door cover assy)
RRA A2 stock
BSA red dot
Sling Stud on right side of Free-Float tube (ukn mfg, came with barrel)
Barrel Assy w/railed gas block and gas tube was purchased off the EE (reference from original owner available upon request) and it is a Wilson 18" SS bull barrel. When purchased, the barrel had about 250 rounds through it and I have fired at least 25 or so since completing the build. Function has been 100 % with Speer Semi-Spitzers so if it will eat that, it will eat anything.
Very accurate barrel, there is some "wear" on the upper from installing the BSA, will touch up with no problems I'm sure, and a few very light marks on barrel. A very, very clean nice compact hunting rifle indeed!! Rifle only, no mag, sling, etc.......
Asking ** SPF to genesis** shipped to your FFL. 1st POSTED "I'll take it gets it....... E-mail questions to Bowhntr6pt@aol.com
ETA: No tight mag-well on this lower, accepts a variety of mags w/o problems with the sticking.