GG&G Flip Up Sights
GG&G A2 is what the DEA uses!!
No Additional Fee For Credit Cards or PaypalA2 Style BUIS Flip Up Rear Sight: $109.95 Shipped - ON SALE $99.95
The GG&G A2 Style BUIS (Back Up Iron Sight) provides the operator with an easy-to-install and easy-to-operate flip up rear sight, and now includes an important new locking detent. Once placed in the up position, the sight cannot be folded down without depressing the spring assisted detent release button located on the left side of the sight base. This totally eliminates the possibility of accidentally lowering the sight.
The A2 BUIS can be used as a stand-alone sight or in conjunction with one of our FIRE System rails. The A2 BUIS can be used as a co-witness iron sight with most of the red dot sighting systems. This sight features the standard A2-style double peep aperture and has full windage adjustment. It uses the Colt-style windage knob and windage screw. One click of the windage knob provides approximately 0.48 MOA change when mounted on the M16A2E4 rifle and about 0.65 MOA on the M4 carbine. Initial zero is set by adjusting the weapons fronts sight post. The new GG&G A2 BUIS is the lowest profile flip up iron sight with locking detent. When in the down position, it will clear most optics.
GG&G MAD BUIS: $119.95 Shipped - ON SALE $109.95
The GG&G MAD (Multiple Aperture Device) BUIS (Back Up Iron Sight) was originally developed to fulfill a request from Naval Surface Warfare for a back up iron sight that provided both a large and small aperture on the same plane and would thus be zeroed to the same point of impact. It has now been improved to include a new locking mechanism. Once deployed in the up position, the sight cannot be folded down without depressing the spring assisted detent release button located on the left side of the sight base. This eliminates the possibility of accidentally lowering the sight.
The MAD has four apertures, two of each size (so that rotating the aperture in either direction will bring the next size into view). The small aperture diameter is 0.073-inch and the large aperture is 0.199-inch in diameter. It uses the standard Colt-style windage knob and windage screw. One click of the windage knob provides approximately 0.48 MOA change when mounted on the M16A2E4 rifle and about 0.65 MOA on the M4 carbine.
The MAD mount body is manufactured from 6061 T6 aluminum and black hard-coat anodized per mil spec. The stem and aperture disc are made from 4140 steel, black manganese phosphated per mil spec. The MAD overhangs the rear of the receiver by 0.200-inch. This provides a lip so that the sight can be easily deployed even with a gloved hand. The unit locks in the up and down position with a positive detent system and is easily installed.
Flip Up Front Sight for Dove Tailed Gas Blocks: $119.95 Shipped
Many shooters feel the standard AR-10 and AR15 removable front sights are cumbersome to use, too easily misplaced, and distracting when optical sights are deployed. The New GG&G Flip Up Front Sight For Dovetailed Gas Blocks is easy to install and simple to deploy. It now is improved with a mechanical locking detent. It can easily be installed by the operator onto the AR-10’s gas block – and that of most AR-15 types - with only a cap screw wrench, which is included. Once installed, it can remain in place as it can be raised or lowered instantly. With the new mechanical locking detent, the front sight cannot be accidentally lowered. To lower the sight the operator only has to push a button. When in the upright position it provides the same command height as the original AR-10 or AR15/M16 front sight. We use standard sight components in this fine sight. This rugged sight is manufactured from 4140 billet steel and is manganese phosphated black to mil spec.
I accept visa/mastercard, paypal, money orders & personal checks.
Paypal ID = email@example.com
Class 1 FFL