We can offer this price because we have more experience and the best equipment of anyone offering this service. We have industrial machines,
not hobby machines. Zero baffle strikes in our career.
We have machines setup, ready for anything that walks in so our setup time is nearly nothing. Most others have to charge a premium because they have one gunsmithing lathe, and most are 36 inches. So takes them much longer than it does us, they likely have to pull the barrels with a lathe that small. Plus many are chambering etc so that one lathe is tied up. We thread and only thread, with an average of
15-20 barrels a day.http://class3machining.comhttps://www.facebook.com/barrelthreading
https://www.instagram.com/class_3_machining/14,000+ Barrels done now and ZERO baffle strikes. Current prices are
40 plus 10 return ship to thread just a barrel (not in action, just a plain barrel with no sights on etc). Imperial threads
50 plus 20 return ship for barreled action, not shortening
55 plus 10 ship to cut, crown and thread just a barrel (no sights etc, loose round barrel) . Imperial threads
75 plus 20 return ship barreled action. /Cut, crown and thread barreled action with no trigger, no scope mount etc
100 plus 20 return ship for cut, crown and thread barreled action with trigger and or scope mount attached.
75 plus 20 return ship for ak barreled action, MP5, FAL etc if not shortening.
75 plus 15 return ship Scar cut, crown and thread if bottom rail is removed.
100 plus 15 return ship cut, crown thread scar with bottom rail on.
120 plus 20 ship to cut, crown and thread ak.
120 plus 20 ship to cut, crown and thread PTR91/HK types
130 shipped back for Beretta 21A if its just a barrel.
75 shipped back for Evo K cut and thread
75 shipped back for MPX imperial cut and thread
100 shipped back for MPX metric threading
65 to remove a pin and welded device is 65
40 Machine timing/indexing
Lever Actions 4-24-2018 updated
90 shipped back for only threading and receiver is totally stripped
140 shipped back cut, crown and thread lever action if stripped
40 to relocate lever action 2 hole sight.
200 shipped back thread, shorten tube on dovetail mag version
250 shipped back for threading, mag tube shortening on screw/band type
40 for shortening of any of the above two services.
We have 60 inch lathes and dedicated jaws setup for a wide variety of things.
Have 7 manual lathes here at my shop, and 5 CNC's at my secondary location. Those are the big boy bar fed Mori Seikis etc,.
Do OEM supressor mounts for 5 companies now, and we thread for over 50 dealers now. (many on this site
Again, work pics on nearly every reply I do in this thread and many are unique hard to do guns. No just Rem 700 and 10/22's you see on other peoples pages.
Every job is thread mic'ed and readings logged into my receipt book Custom sico mount
Nice shout from my buddy, the infamous Phuc Long
Nice shout out from Shoot Wise in La.
Just got my new website up and running check it out, price links, consolidated pictures etc.
Work pics on every page of this thread www.class3machining.com
Sig MPX Thread adaptors
This price is for sending us the barrel (or barreled action is fine, take off stock, trigger, scope mount and scope off and we are set) only, ready to go. If we have to disassemble there is a charge of $25 bucks added to cost.Edit: There are new pics of my work on nearly every post I make in this thread.
Barreled action is fine.
We only thread on insider diameter and will be concentric to the bore.
Turnaround is very fast, will average 2 days before its headed back your way via insured Fedex shipping. (This turnaround time is for threading only, perm attaching flashhider, relocating sights etc, will take additional time). Straight thread jobs are 1-2 days though. If I have to disassemble the gun additional time is needed as well.
Two days or less is for a barrel ready to be put in the lathe.
This sale is for all normal right hand threads (1/2x28, 5/8x24 etc). We can do all threads, but costs a little more.
Can do paypal with no fees added as well.