These aren't really "custom" custom. Basically, we install a rail on a gun and *BOOM*, its custom!

$950
MK18 Mod0 Clone
LMT 10.5" with LMT fixed rear sight and tactical charging handle, f/a BCG. KAC RAS rail and KAC M4QD flash suppressor/NT4 mount. The RAS is a cosmetic seconds rail priced at $150 from KAC, although I am unsure what it is that makes it a second. The flash suppressor/mount is properly timed with the KAC shim kit and rock set to the barrel, ready to mount an NT4.





________________________________________________


$930
MK18 Mod1 Clone
LMT 10.5" with tactical charging handle, f/a BCG and DD RAS II MK18 rail. The standard front sight has been shaved down to fit under the rail and maintain the double pinned gas block. We have KAC QD flash suppressors available for a more authentic clone if you would like.





________________________________________________


$820
LMT 10.5" with Troy TRX 9"
LMT 10.5" upper with LMT Tactical charging handle and full auto bolt carrier group. Troy 9" TRX rail installed. LMT front sight has been shaved down to maintain the double pinned gas block.




Pictured is one we built up for a guy Accessories not included.



________________________________________________


$850 SOLD OUT
Daniel Defense M4 with M4 12.0 FSP
Daniel Defense flat top upper with Daniel Defense 16" M4 profile hammer forged barrel. Chrome lined, 1/7 twist, taper pinned gas block. (Upper is usually $155, barrel is $389, rail is $359 = $903, gas tube, flash hider, crush washer and assembly no charge). This is a complete upper with bolt group and charging handle included.



________________________________________________


$1070 SOLD OUT
Noveske N4 Carbine with KAC RAS
A Noveske N4 Basic Carbine with a KAC RAS. This is a 14.5" barrel pinned with a Smith Enterprises Vortex. It comes with charging handle and bolt group from Noveske as well as the Noveske marked Troy rear sight. The RAS was sold as a factory seconds item, although there is nothing wrong with the rail. The standard RAS usually sells for $300 or so, the factory seconds sell for $150. The upper normally sells at $945.




________________________________________________


$1160 SOLD OUT
Bravo Company 11.5" BFH upper with KAC Mid URX II
Bravo 11.5" Cold Hammer Forged upper with mid length KAC URX II rail. Cut down gas block like above. Does not include charging handle or bolt group.
shown with optional KAC QD flash suppressor (available but not included)



________________________________________________


$1000 SOLD OUT
Bravo Company 11.5" URG with KAC Mid URX II
Bravo 11.5" upper receiver with mid length KAC URX II rail. We cut down the standard fron sight and cold blued it to maintain the double taper pined gas block. This does not include a charging handle or bolt group. Please see above for a partial list of available options.



________________________________________________


$1160 SOLD OUT
Bravo Company 16" mid BFH upper with KAC rifle URX II
Bravo 16" mid length Cold Hammer Forged upper with rifle length KAC URX II rail. Cut down gas block like above. Does not include charging handle or bolt group.



________________________________________________


$1250 - SOLD OUT
Noveske N4 Carbine with Daniel Defense M4A1 RIS II
This was a Noveske N4 Basic Carbine upper that had a pinned and welded flash suppressor. We removed the fixed flash suppressor and added the Daniel Defense rail. It is a 14.5" barrel and requires NFA paperwork. It is a complete upper with the factory Noveske bolt group, charging handle and Noveske marked Troy rear sight. (Upper sells at $945, rail sells for $399)




________________________________________________


$1300 - SOLD OUT
Noveske N4 Recce with Daniel Defense M4 12.0 FSPM
This was a Noveske Basic Recce. We took the handguards off and dropped a Daniel Defense M4 12.0 FSPM rail on. It is a complete upper with the factory Noveske bolt group, charging handle and Noveske marked Troy rear sight. (Upper sells at $975, rail sells for $370)




________________________________________________


$1180 - SOLD OUT
Noveske N4 Carbine with Daniel Defense 7" Omega
This was also a Noveske N4 Basic upper. We removed the handguards, dropped on a Omega 7" and whoa, now it's "custom" . This is a 14.5" barrel with a pinned and welded Vortex. It is a complete upper with the factory Noveske bolt group, charging handle and Noveske marked Troy rear sight. (Upper sells at $945, rail sells for $279)




________________________________________________


$1975 - SOLD OUT
PRI built MK12 Mod0 upper
True clone built by Dave Dunlop and Company at Precicion Reflex Incorporated. This is a complete upper with PRI Gas Buster, CMT F/A BCG, PRI 3rd Gen Carbon Fiber tube coated black, 18" stainless Douglass barrel coated black, PRI flip up front sight, Ops Inc brake and collar, ARMS #38SPR Sleeve and ARMS #40L rear sight. Upper comes with test target and PRI shirt. We do have Ops 12 model silencers in stock as well (pictured but not included)


________________________________________________


For those uppers coming without bolt groups, charging handles or sights, add the following if you'd like:

PRI Gas Buster - $85
CMT Charging Handle - $22
LMT Tactical Handle - $45
BCM Gunfighter (mod 3 or 4) - $45

BCM F/A Bolt Carrier Group - $145
BCM F/A Bolt Carrier Group w IonBond - $225
RRA S/A Bolt Carrier Group - $135

KAC flip up front sight $153
Daniel Defense fixed front sight $60
KAC 300m Micro rear sight $125
KAC 600m Micro rear sight $155
Daniel Defense fixed rear sight $70
Magpul MOE in most colors $90 per set
Set of Troy sights in black or tan $200

I have a large variety of other sights, pannels, optics mounts etc also available, but the ones listed have been the most popular for this configuration. Flash hiders, brakes and silencer mounts from AAC, KAC, Surefire, PWS, Smith Enterprise Vortex, Noveske and more.

All major credit cards accepted. All uppers are assembled, in stock, and ready to ship. We will ship the same or next business day and charge actual UPS prices.

There are some used custom uppers available HERE

Please call and ask for Neil
904-641-1619

Is it possible to get one of the MK18 style uppers with a non-marked upper receiver, maybe a Colt?
Dustin

Those,s look Great !    I,m in the market for another upper––––-I like this one–– Bravo Company 16" mid BFH upper with KAC rifle URX II

Sure, but we do not have Colt uppers in stock. If you have an upper you would like us to build on, we can do that as well. The only M4 feedramped uppers I currently have in stock ate CMT, Daniel Defense and Vltor MUR's.

do you guys take paypal by chance?

I'm sorry, but we do not. Visa, M/C, AmEx, Discover, postal money orders, and on the rare occasion, even cash (we dont take cash through the mail though )

pinned gas block on the mk18 upper ? thanks

Probably. Daniel Defense sells that barrel with a pinned "A frame" gas block/front sight. We can cut down those front sights just like the BCM/URX uppers pictured above and sell the same upper for the same price. I am, however, out of all the rails now. If you would like to order one, let me call DD on Monday and find out of they have everyting I need in stock. If they do I'll let you know. We can typically assemble the upper the same day as the shipment arrives, and get it mailed out the next day.

Sorry it's late I thought this was a discussion post when I got linked here from a discussion on M4carbine.net.  

Nice uppers.

btt

btt

btt

btt

BTT

BTT

btt

btt

btt

BTT

btt

$1000 - SOLD OUT
Daniel Defense MK 18 Mod 1 clone (upper is usually $155, barrel $359, MK 18 RIS is $359, gas block is $55, F/H is $90, gas tube is $13)
This upper uses a Daniel Defense 1/7, chrome lined, hammer forged, m4 feedramp, 10.3" barrel (technically the barrel is 10.225" long) with a Daniel Defense RIS MK18 rail and Daniel Defense flat top upper. We used a PRI low-profile gas block and KAC QD flash suppressor. The upper as priced has no sights, charging handle or bolt group.

When will you be getting more of these in stock?
Thanks,
Sean

I have everything to make these uppers except the rails. We have had them on back order through DD for some time now. As soon as we get more in we will be making them., In the meantime, there is a VERY similar upper for sale at this ad:

http://www.ar15.com/forums/topic.html?b=7&f=119&t=732725

Slightly used and built off a Noveske N4 LoPro upper.

BTT

BTT

btt

looking Good –– Just hanging out in the shadows waiting for an upper with a Noveske 16in barrel length with a  ( chrome lined or S.S )

btt

btt

btt

btt

btt

BTT

btt

Hey New-ARGUY
I'm thinking about purchasing a Noveske Afghan 14.5 can you get those with a flashider pinned (to be California Legal?)

glad to be able help George... Thanks

btt

how much are KAC QD fh and suppressors?

KAC QD flash suppressor is in stock at $85... and BTT

btt

btt

Any chance of a Noveske/Vltor upper w/16" 1/7 barrel and DD MK18 rail/lo pro gas block, Troy flip up BUIS combo? Possible??

BTT, thanks for the orders!

btt

btt

btt

btt

btt

btt

btt