Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 1/22/2006 3:07:14 PM EST
Hey all,
I hope this isn't a stupid question. My 10/22 already has a 16" fluted bull bbl on it. I'm thinking of getting a suppressor for some of my .22's. Since the barrel is already 16" is it possible to get it threaded without shortening it any further? I don't want to go the SBR route.

Link Posted: 1/23/2006 2:06:04 AM EST
You shouldn't have a problem as the material being removed comes from the outer diameter of the barrel and wont effect the length. This is provided of course that you are not attempting this job on a "makeshift " lathe in your garage and will need multiple attempts to make it concentric.
Link Posted: 1/23/2006 2:10:02 AM EST
Fatzombie is correct...whatever you do, don't try to use a threading die!

It must be done on a lathe, between centers, to assure bore concentricity.

Bob Ash
Link Posted: 1/23/2006 12:02:01 PM EST
Top Top