Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 5/6/2002 8:17:31 PM EST
I have a Butler Creek featherweight barrel for my 10/22 and was wondering if there is a way to paint over the stainless steel muzzle and breach? The rest of the barrel is black, however, the muzzle and breach is a stainless steel, which looks kind of stupid on my blued gun. Not too big of a deal, but I was hoping there would be a reliable method I could use to paint over the stainless steel parts and still make the barrel look good. Basically I just want to remove the shine from the stainless and make the barrel completely black. Any suggestions would be very appreciated. Thanks!
Link Posted: 5/6/2002 9:27:53 PM EST
[Last Edit: 5/6/2002 9:33:49 PM EST by Zardoz]
After making damn sure no paint enters the barrel, try first spraying with black epoxy paint (which is the only paint that will stick to SS) as sort of a base coat, then when it's completely dry (probably about a week) putting on a second coat of flat black. beware, though, that the flat would have to be applied in very light coats, as epoxy paint, and enemel are not normally compatible.
Top Top