Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
Posted: 10/30/2009 6:21:06 AM EST
I aquired a 1972 camdex loader setup for .38's and was wondering how much it was worth after I get it cleaned up and running again.
Link Posted: 10/30/2009 6:40:52 AM EST
[Last Edit: 10/30/2009 6:41:34 AM EST by AeroE]
Link Posted: 10/30/2009 8:45:37 AM EST
post some pics
Link Posted: 10/30/2009 5:50:04 PM EST
I can't consider it a score without pics, but that's me.
Link Posted: 10/30/2009 7:59:29 PM EST
On the one hand, if there are no pics, it didn't happen.

On the other hand, drool, drool, drool.
Link Posted: 10/31/2009 11:08:34 AM EST
It's worth nothing without pics
Link Posted: 11/1/2009 4:53:52 PM EST

Its been sitting in a shed for the last 5 years and the corrosion is mostly on the surface non essential stuff, not the moving parts.
Link Posted: 11/1/2009 4:57:12 PM EST
Great pic, you should get some better replys now.
Link Posted: 11/1/2009 5:46:01 PM EST
Link Posted: 11/1/2009 5:49:56 PM EST
For comparisons sake, here's the manufacturers web page for new pricing:

Link Posted: 11/1/2009 6:31:22 PM EST
Link Posted: 11/2/2009 5:46:51 AM EST
looks like a cool ass press
Link Posted: 11/2/2009 9:11:43 AM EST
Looks to be a pretty bottom end model or it's missing some/most accessories.

Probably cost more than a few grand to refurb/update.

Although a new fully loaded version can go for upwards of $20K, it wouldn't surprise me in the least if it failed to generate any interest at or above the $1K mark.
Link Posted: 11/3/2009 11:13:58 AM EST
This is just a pic of the press itself. I have the case and bullet feeder as well as the primer feeder.
Link Posted: 11/4/2009 4:28:57 PM EST
I have an circa 1970's ammoload machine and have priced both new ammoload and camdex. $25 to $30 grand for new and an old one might fetch $2000. if you keep it I hope you have a machimist on call . One die for my machine is for $300 to $400 and the slide rails are about $400 each , Bullet collators start at $2700 Mine will do a round about every second , if it doesnt have a melt down . You'll also need a primer tube filler $1350 new All commercial grade . If it was in 223 and by the way all the brass needs to processed first , you could load for a light infantry company in a week if you had a barrel of 223 roughly 40000 pieces and all the other goodies you need . Could be a nice winter project.
Link Posted: 11/5/2009 6:27:48 AM EST
Top Top