Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/16/2003 8:06:57 PM EST
[Last Edit: 10/16/2003 8:08:25 PM EST by 4gma]
Going to a gunshow this weekend with another G3 type on the list. Whats the range on the bolt carrier gap (headspace)? Just want to check before I buy so I can at least eliminate that from the list of probs before I buy.

Thanks
Link Posted: 10/17/2003 5:40:35 AM EST
Link Posted: 10/17/2003 6:17:06 AM EST
Bolt gap should be between .1mm to .5mm or .004 to .020 inches. If it's below .007 inches I would replace the rollers with +4s.
Link Posted: 10/17/2003 7:22:26 AM EST
Thanks guys. I knew that Dano had told me in a prevoius post but I couldnt pull it up.
Top Top