Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 10/31/2001 4:37:45 PM EST
I have a carbine with a 18" barrel and want to cut it down to 16". If I put an empty shell into the chamber and seat it fully, then measure the distance from the crown to base of shell will that give me my OAL of barrel? Thanks
Link Posted: 10/31/2001 4:42:45 PM EST
Have the barrel professionally cut and refinished by someone like Kurt, especially if it is chrome-lined.

Otherwise, the barrel length is measured from the face of the closed bolt to the muzzle. Simply close the bolt, insert a cleaning rod until it contacts the bolt face. Mark the rod where it emerges from the muzzle and measure the rod from end to mark.
Link Posted: 10/31/2001 5:10:48 PM EST
Dave_G is right- have a pro cut that barrel, especially if it's chrome-lined. It's easy to chip that chrome at the cut, and they you are fuckee-fuckeed.
Link Posted: 11/1/2001 7:48:56 AM EST
Thanks for the info. I own a machine shop and can do it at the shop.
Top Top