Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login

Site Notices
12/6/2019 7:27:02 PM
Posted: 3/14/2011 3:31:40 PM EST
Does anybody make a thread adapter for a ak 47. The ak has a 14 x 1, mm left hand thread and most cans for 30 cal. have a 3/4 - 24 thread.
I had a friend ask me to make him one,but if some one allready makes them i will tell him to bye one.
Link Posted: 3/14/2011 5:44:15 PM EST
Most 30 cal cans I have seen are 5/8-24 TPI.

and AK's threads are hardly ever concentric and coaxial.
Link Posted: 3/14/2011 5:49:31 PM EST
[Last Edit: 3/14/2011 5:52:24 PM EST by BASE]
YHM does. I must be lucky as all of mine line up fine with the can.

ETA: Oops sorry, your were looking for a thread adapter. Not sure about that. The guy above has it right though, I've never seen a 30cal can with 3/4 inch threads.
Link Posted: 3/15/2011 3:07:46 PM EST
(my bad) you are right 5/8 thread . i should know i just threaded his Rem.700 a month ago. From the looks of it ill have to make one .
Link Posted: 3/15/2011 3:27:39 PM EST
There won't be enough material in just an adapter to have a 14mm internal thread and a 5/8" external thread. You'll probably have to make an extension instead with the external thread a little bit away from the internal thread.
Link Posted: 3/15/2011 4:06:45 PM EST
Yes you are right , i drew one up on CAD. to see how it would work.
Top Top