Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/25/2002 12:14:48 PM EST
I took apart the bolt and now can't put the darn thing back together. Can someone give detailed instructions or a link???

btw...it is from AIM and is sweeet.
Link Posted: 3/25/2002 12:21:30 PM EST
Lemmie know if you can't get it back together...

Link Posted: 3/25/2002 12:21:43 PM EST
Link Posted: 3/25/2002 12:22:38 PM EST
Link Posted: 3/25/2002 12:25:44 PM EST
Deluged with info...!
Link Posted: 3/25/2002 4:54:37 PM EST

This thing is giving me trouble still. I have four pieces. The firing pin, and the three pieces that connect to it. I can't seem to get them to go together so it will screw into the bolt handle part.
Link Posted: 3/25/2002 7:18:52 PM EST
[Last Edit: 3/25/2002 7:25:03 PM EST by Noname]
"Put the bolt body down and let's get to the firing mechanism. You can use the Bolt Take Down Disk on the butt of the rifle (5A), or drill a 1/8" hole about 1/4" deep in a piece of soft wood. For this example, use the take down disk. Place the firing pin tip into the hole and the firing pin safety shoulders will rest on the disk. Keep the assembly vertical and do not accidentally bend the tip.

Keeping the safety vertical, place your thumb over the safety, grip the bolt sleeve and compress the spring. With the other hand, as soon as the cocking piece turns freely, rotate it 1/4 turn in either direction, lift off, and gently release pressure on the spring.

The bolt sleeve and spring will slide off the firing pin. Turn the safety to the right and remove."

This is disassembly---just reverse instructions...
Link Posted: 3/26/2002 5:06:38 AM EST
Ahha! I did'nt have the safety in the vertical position. Got it now. Thanks a bunch.
Top Top