Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/19/2002 10:24:25 AM EST
Some time ago, I posted here regarding a Remington 700 Police that I had picked up, and an annoying problem that I was encountering. The bolt stop release would stick in the down position whenever it was used, and had to be pried up to keep the bolt from pulling free of the rifle the next time it was worked.


It turns out that the aluminum bedding block built into the standard HS Precision stock had a slight burr on one side, and a little work with a Dremel tool and some emery cloth smoothed it right out.

Now my bolt stop release pops right back up when depressed, and the trigger is centered left to right in the triggerguard. Yippee skippy!
Link Posted: 3/19/2002 11:41:06 AM EST
You`re on your way to the gold medal!.....
Link Posted: 3/19/2002 11:54:59 AM EST

So the order of battle is.

(1) Get your rifle to work
(2) Learn to hit what you are aiming at
(3) Compete and win gold medal

Top Top