Warning

 

Close

Confirm Action

Are you sure you wish to do this?

Confirm Cancel
Member Login
Site Notices
1/25/2018 7:38:29 AM
Posted: 3/3/2002 5:57:41 PM EST
Will i have problems mouting a RAS M5 to a 6601 HBAR upper?
Thanks
Glen
Link Posted: 3/3/2002 6:34:22 PM EST
why on earth would you want to, i have a 6601, its possibly the best DCM service rifle for the money IMHO. build an M4gery.
Link Posted: 3/3/2002 6:37:25 PM EST
Try Wes or Paul at MSTN. They can answer your question.

Hope this helps.
Link Posted: 3/3/2002 7:23:00 PM EST
Link Posted: 3/4/2002 6:01:43 AM EST
It will work fine! My M5 RAS is currently mounted on my R6601 upper!

I have seen these used on both government and HBAR profile barrels as well as on a dissipator where the gas block was slightly trimmed to allow more room for the RAS heat shields.

I have also used one of these on an Eagle Arms AR-10 upper but it was necessary to remove the top clamp at the barrel nut as the AR-10 barrel chamber and barrel nut will not allow the top RAS to close arount the barrel with this clamp in place. Once removed, the RAS mounted just fine and was solid!

Good Luck!
Link Posted: 3/4/2002 10:23:10 AM EST
Thank you for all your help. I'll be getting one .
GlenR
Top Top